Imagine SELOPT-SK-J2K-ULL SOFTWARE KEY OPTION FOR J2K, ULTRA LOW...
Software key option for JPEG2000, ultra low latency mode (can be used with any part number)
Manufacturer: Imagine Communications
$1,400.00
Availability: In stock
SKU
SELOPT-SK-J2K-ULL
Manufacturer: Imagine Communications
Imagine SELOPT-SK-J2K-ULL SOFTWARE KEY OPTION FOR J2K, ULTRA LOW LATENCY MODE (CAN BE USED WITH ANY PART NUMBER); Software Key option for JPEG2000, Ultra Low Latency mode (can be used with any part number)
Software key option for JPEG2000, ultra low latency mode (can be used with any part number)The new Selenio JPEG2000 module is a multichannel encoder/decoder solution, offering real-time, high-quality JPEG2000 compression over IP.A single module supports up to four HD/SD-SDI channels or two 3G-SDI channels.
Delivering superior interoperability with many third-party JPEG2000 solution vendors, this module harnesses the power of the Selenio media convergence platform, which offers higher density, enhanced redundancy schemes, an easy-to-use interface and low total cost of ownership. The platform’s flexible, expandable design enables customers to mix and match JPEG2000 and H.264/MPEG-2 functionality, as well as other Selenio processing capabilities, in the same frame, for a future-proof solution.
Markets/Applications
- Professional broadcast contribution (contribution from event venue to studio/network)
- Studio-to-studio media exchange (production contribution)
- In-house signal distribution and routing (dynamic IP-based tie-lines)
- Live event coverage/fiber-based news and remote studio productions
- Real-time transport of 3G/HD/SD over IP
Features
- Multichannel, real-time JPEG2000 compression in a single-slot Selenio module
- Support for 10 bits/4:2:2, standard latency, up to 4 HD/SD channels or 2 3G channels, visually lossless encoding and decoding (including genlock)
- 8 HD-BNC ports, plus internal SDI links to/from other Selenio products
- Dual-network interfaces supporting 1GigE SFP (electrical/fiber)
- Software key-upgradeable between the different encoder/decoder channel options
- Multichannel 3G/HD/SD-SDI video encapsulation using SMPTE 2022-2
- Standards-based FEC, supporting SMPTE 2022-1 for protection against packet losses created by occasional network errors
- Low latency (<40 ms end-to-end) and ultra-low latency (sub-frame latency) contribution, JPEG2000 compression and encapsulation
- Support for Near/Mathematically Lossless (MLS) compression for video signals
- Configurable transport stream bit rates with automatic video rate optimization based on audio and ancillary data to be carried
- Support for DVB-ASI network interface for use in traditional video networks employing ASI multiplexing
- Support for Unicast and Multicast transmission
- Support for SMPTE 2022-7 seamless protection specification
- Support for VLAN tagging for segregation of traffic and Quality of Service differentiation via TOS
- Audio transport for up to 8 pairs (4 groups) of AES audio for
- HD/SD signals including Dolby E and AC-3
- Dolby E-compatible frame skip and repeat on non-PCM signals
- Transparent transport of VANC data for HD/SD signals
- Supported by Service Manager, Reservation-Based Scheduling and Management application
- Support for Selenio standard software upgrade method
- Support for Selenio audio expander module for additional AES I/O
- Support for full redundancy schemes provided in Selenio platform, N+M, N+1, 1+1 and more
- SEL-0J2KD1-EOS:
- Support for reception of 4 SMPTE-2022-1/2 streams each stream being 1-213Mbps per IP input port
- Support for SMPTE-2022-7 protection of the 4 streams using the redundant IP input
- 4 ASI outputs from the source protected IP streams. The TS output will be unmodified from input TS
- User selection to set up to 4 HD-BNCs to ASI output of the source TSs
Specifications
Specifications and designs are subject to change without notice
| SDI- BNC Video Inputs | |
|---|---|
| Number of Inputs | Up to 8 – (bi-directional port shared with output) |
| Connector Type | (High-Density) HD-BNC |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60 DVB-ASI |
| Impedance | 75 ohms |
| Return Loss | >15 dB to clock frequency (SD) >15 dB to clock frequency (HD) >15 dB to 1.5 GHz and >10 dB to 3 GHz (3G) |
| Signal Level | 800 mV ±10% |
| Max input cable | >250 m for Belden 1694A co-axial cable (SD) >150 m for Belden 1694A co-axial cable (HD) >100 m for Belden 1694A co-axial cable (3G) (Adaptive cable equalization) |
| SDI- Differential Video Inputs ( From Video Expander card) | |
|---|---|
| Number of Inputs | 3 |
| Connector Type | Differential signal |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60, DVB-ASI |
| Impedance | 100 ohms |
| Signal Level | 800 mV ±30% |
| DC Offset | PCML standard |
| Rise and Fall times | <155 ps |
| Overshoot/Undershoot | <25% |
| Jitter | <0.05UI pk-pk random jitter <0.2UI deterministic jitter |
| SDI- BNC Video Outputs | |
|---|---|
| Number of outputs | Up to 8 – (bi-directional port shared with output) |
| Connector Type | (High-Density) HD-BNC |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60. DVB-ASI |
| Impedance | 75 ohms |
| Return Loss | >15 dB to clock frequency (SD) >15 dB to clock frequency (HD) >15 dB to 1.5 GHz >10 dB to 3 GHz (3G) |
| Signal Level | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall times | 0.75 ns to 1.5 ns (SD)<270 ps (HD) <135 ps (3G) |
| Overshoot/Undershoot | <10% |
| Jitter | <0.2UI pk-pk (>10 Hz) (SD) <1UI (673ps) peak-to-peak of timing jitter (>10 Hz) (HD) <0.2UI (135ps) pk-pk of alignment jitter for (>100 kHz) (HD) <2UI (673 ps) pk-pk of timing jitter (>10 Hz) (3G) <0.3UI (101 ps) pk-pk of alignment jitter (>100 kHz) (3G) |
| SDI- Differential Video Outputs (To Video Expander card) | |
|---|---|
| Number of outputs | 3 |
| Connector Type | Differential signal |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60 DVB-ASI |
| Impedance | 100 ohms |
| Signal Level | 800 mV ±30% |
| DC Offset | CML standard |
| Rise and Fall times | <155 ps |
| Overshoot/Undershoot | <25% |
| Jitter | <0.05UI pk-pk random jitter <0.2UI deterministic jitter |
Manufacturer: Imagine Communications
| Manufacturer | Imagine Communications |
|---|
Write Your Own Review
Check items to add to the cart or
My Wish List
Last Added Items
You have no items in your wish list.