Imagine SELOPT-SK-J2K-MLS SW KEY OPT FOR J2K, NEAR/TRUE...
Software key option for JPEG2000, near/true mathematically lossless, 1x HD/SD channel. Only available when the module is enabled with 4x HD/SD channels
Manufacturer: Imagine Communications
$2,100.00
Availability: In stock
SKU
SELOPT-SK-J2K-MLS
Manufacturer: Imagine Communications
Imagine SELOPT-SK-J2K-MLS SW KEY OPT FOR J2K, NEAR/TRUE LOSSLESS, 1X HD/SD CH ONLY AVAILABLE WHEN 4X HD/SD IS ENABLED; Software Key option for JPEG2000, Near/True Mathematically Lossless, 1x HD/SD channel. Only available when the module is enabled with 4x HD/SD channels
Software key option for JPEG2000, near/true mathematically lossless, 1x HD/SD channel. Only available when the module is enabled with 4x HD/SD channelsThe new Selenio JPEG2000 module is a multichannel encoder/decoder solution, offering real-time, high-quality JPEG2000 compression over IP.A single module supports up to four HD/SD-SDI channels or two 3G-SDI channels.
Delivering superior interoperability with many third-party JPEG2000 solution vendors, this module harnesses the power of the Selenio media convergence platform, which offers higher density, enhanced redundancy schemes, an easy-to-use interface and low total cost of ownership. The platform’s flexible, expandable design enables customers to mix and match JPEG2000 and H.264/MPEG-2 functionality, as well as other Selenio processing capabilities, in the same frame, for a future-proof solution.
Markets/Applications
- Professional broadcast contribution (contribution from event venue to studio/network)
- Studio-to-studio media exchange (production contribution)
- In-house signal distribution and routing (dynamic IP-based tie-lines)
- Live event coverage/fiber-based news and remote studio productions
- Real-time transport of 3G/HD/SD over IP
Features
- Multichannel, real-time JPEG2000 compression in a single-slot Selenio module
- Support for 10 bits/4:2:2, standard latency, up to 4 HD/SD channels or 2 3G channels, visually lossless encoding and decoding (including genlock)
- 8 HD-BNC ports, plus internal SDI links to/from other Selenio products
- Dual-network interfaces supporting 1GigE SFP (electrical/fiber)
- Software key-upgradeable between the different encoder/decoder channel options
- Multichannel 3G/HD/SD-SDI video encapsulation using SMPTE 2022-2
- Standards-based FEC, supporting SMPTE 2022-1 for protection against packet losses created by occasional network errors
- Low latency (<40 ms end-to-end) and ultra-low latency (sub-frame latency) contribution, JPEG2000 compression and encapsulation
- Support for Near/Mathematically Lossless (MLS) compression for video signals
- Configurable transport stream bit rates with automatic video rate optimization based on audio and ancillary data to be carried
- Support for DVB-ASI network interface for use in traditional video networks employing ASI multiplexing
- Support for Unicast and Multicast transmission
- Support for SMPTE 2022-7 seamless protection specification
- Support for VLAN tagging for segregation of traffic and Quality of Service differentiation via TOS
- Audio transport for up to 8 pairs (4 groups) of AES audio for
- HD/SD signals including Dolby E and AC-3
- Dolby E-compatible frame skip and repeat on non-PCM signals
- Transparent transport of VANC data for HD/SD signals
- Supported by Service Manager, Reservation-Based Scheduling and Management application
- Support for Selenio standard software upgrade method
- Support for Selenio audio expander module for additional AES I/O
- Support for full redundancy schemes provided in Selenio platform, N+M, N+1, 1+1 and more
- SEL-0J2KD1-EOS:
- Support for reception of 4 SMPTE-2022-1/2 streams each stream being 1-213Mbps per IP input port
- Support for SMPTE-2022-7 protection of the 4 streams using the redundant IP input
- 4 ASI outputs from the source protected IP streams. The TS output will be unmodified from input TS
- User selection to set up to 4 HD-BNCs to ASI output of the source TSs
Specifications
Specifications and designs are subject to change without notice
| SDI- BNC Video Inputs | |
|---|---|
| Number of Inputs | Up to 8 – (bi-directional port shared with output) |
| Connector Type | (High-Density) HD-BNC |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60 DVB-ASI |
| Impedance | 75 ohms |
| Return Loss | >15 dB to clock frequency (SD) >15 dB to clock frequency (HD) >15 dB to 1.5 GHz and >10 dB to 3 GHz (3G) |
| Signal Level | 800 mV ±10% |
| Max input cable | >250 m for Belden 1694A co-axial cable (SD) >150 m for Belden 1694A co-axial cable (HD) >100 m for Belden 1694A co-axial cable (3G) (Adaptive cable equalization) |
| SDI- Differential Video Inputs ( From Video Expander card) | |
|---|---|
| Number of Inputs | 3 |
| Connector Type | Differential signal |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60, DVB-ASI |
| Impedance | 100 ohms |
| Signal Level | 800 mV ±30% |
| DC Offset | PCML standard |
| Rise and Fall times | <155 ps |
| Overshoot/Undershoot | <25% |
| Jitter | <0.05UI pk-pk random jitter <0.2UI deterministic jitter |
| SDI- BNC Video Outputs | |
|---|---|
| Number of outputs | Up to 8 – (bi-directional port shared with output) |
| Connector Type | (High-Density) HD-BNC |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60. DVB-ASI |
| Impedance | 75 ohms |
| Return Loss | >15 dB to clock frequency (SD) >15 dB to clock frequency (HD) >15 dB to 1.5 GHz >10 dB to 3 GHz (3G) |
| Signal Level | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall times | 0.75 ns to 1.5 ns (SD)<270 ps (HD) <135 ps (3G) |
| Overshoot/Undershoot | <10% |
| Jitter | <0.2UI pk-pk (>10 Hz) (SD) <1UI (673ps) peak-to-peak of timing jitter (>10 Hz) (HD) <0.2UI (135ps) pk-pk of alignment jitter for (>100 kHz) (HD) <2UI (673 ps) pk-pk of timing jitter (>10 Hz) (3G) <0.3UI (101 ps) pk-pk of alignment jitter (>100 kHz) (3G) |
| SDI- Differential Video Outputs (To Video Expander card) | |
|---|---|
| Number of outputs | 3 |
| Connector Type | Differential signal |
| Standards | SMPTE 259M-C (SD), 525/625 SMPTE 292M-C (HD), 720p50/59/60, 1080i50/59/60 SMPTE 424M (3G), 1080p50/59/60 DVB-ASI |
| Impedance | 100 ohms |
| Signal Level | 800 mV ±30% |
| DC Offset | CML standard |
| Rise and Fall times | <155 ps |
| Overshoot/Undershoot | <25% |
| Jitter | <0.05UI pk-pk random jitter <0.2UI deterministic jitter |
Manufacturer: Imagine Communications
| Manufacturer | Imagine Communications |
|---|
Write Your Own Review
Check items to add to the cart or
My Wish List
Last Added Items
You have no items in your wish list.