As the broadcast industry continues to migrate toward IP and its inherent efficiencies, customers with less complex operational requirements or space constraints no longer have to make compromises when it comes to on-air and signal transport functionality.
Introducing the Selenio MCP1 — an extension of the award-winning original platform that delivers the same capabilities in a cost-effective, space-saving 1RU package. Ideal for fixed and mobile contribution applications with low channel counts or operations needing a more compact form factor, the Selenio MCP1 is customizable to user requirements and factory-tailored with up to three modules. Customers can choose cards based on specific application needs, spanning video encoding, decoding, multiplexing and baseband processing. The Selenio MCP1 features the same intuitive, web-based GUI as the original 3RU chassis, as well as a new operator-friendly front control panel.
Now you can fuel operational efficiencies for a smaller number of services, while reaping the benefits of the same core baseband and IP functionality of the proven original.
Genlock Reference
There are three means of utilizing the external reference:
Application modules with a frame synchronizer function have an analog reference connection to the external reference input.
Application modules that require a digital reference — such as the encoder, decoder or multiplexer/demultplexer — have a digital reference connection to the controller.
Intuitive Web-based GUI
Featuring a built-in, browser-based management system (no software required) that incorporates support for rich interactive features through Microsoft Silverlight, the Selenio MCP1 provides a graphically rich interface that enables operators to get the most functionality from the new platform — without being buried under an avalanche of manuals and bespoke commands.
Operators can access the platform from their web browser and, using graphical block diagrams for each particular module, can easily step through the configuration process — significantly reducing the chance of error.
HD-BNC Connectors
Selenio application modules utilize high-density HD-BNC connectors for video and audio connectivity. The HD-BNC offers the same strength and is the same bayonet-locking connector as standard BNC connectors.
HD-BNC connectors meet all SMPTE 292M and SMPTE 424M return loss specifications — and exceeds them at 3 Gb/s. For high-density applications, a cable insertion/extraction tool is available, which is as simple to use as the standard BNC tool.
Controller
The Selenio system controller module provides control and management for the entire system. Functions include provisioning, status, fault management and supervisory control. Integral SDI/ASI and Ethernet switching with external routing provides N+1 redundancy.
The controller includes three 1000Base-T Ethernet interfaces. One interface provides an IP connection for system control and firmware upgrades, as well as for monitoring purposes. The second and third redundant 1000Base-T Ethernet interfaces are enabled for video and audio data applications.
Specifications and designs are subject to change without notice
Power Supply | |
---|---|
Input Voltage Rated | 100 to 240 VAC |
Operating | 90 to 250 VAC |
Frequency Rated | 50 to 60 Hz |
Operating | 47 to 63 Hz |
Input Current Rated | 3.5A RMS maximum |
Operating | 3.3A RMS maximum at 90 VAC with 300 W output 1.2A RMS maximum at 250 VAC with 300 W output |
Efficiency | The PSU will deliver an efficiency of no less than 86% at any net power level greater than 25% of rated output |
Power Factor | >0.95 at output power >50% load @ 250 VAC input >0.95 at output power >30% load @ 90 VAC input >0.97 at 90 to 135 VAC and >0.95 at 180 to 250 VAC, typical |
Harmonic Distortion | Complies with the requirements of EN61000-3-2 |
External Reference - Genlock | |
---|---|
Connector | BNC (IEC169-8) |
Impedance | 75 ohms |
Return Loss | >40 dB 25 Hz to 10 MHz (SMPTE 318M-1999) |
Common Mode Range | 5.5 V pk-pk |
CMRR | 60 dB @ 60 Hz, 5 V pk-pk |
Input Level | NTSC/PAL-B: 1 V pk-pk, –6.0 dB to +6.0 dB; Tri-level sync: ±300 mV, –6.0 dB to +6.0 dB DARS: 1 V pk-pk |
Controller Module Reference | |
---|---|
Standard | 525i/59.94, 625i/50, 720p/25, 720p/29.97, 720p/30, 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080sF/23.98, 1080sF/24, 1080sF/25, 1080sF/29.97, 1080sF/30, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30 |
Standard | SMPTE 170M (NTSC), ITU-R BT.470-6 (PAL-B), SMPTE 274M (1080i, 1080p), SMPTE 296M (720p), AES3 SMPTE 276M |
Ethernet | |
---|---|
Connector | RJ-45 |
Standard | 10/100/1000Base-T |
Differential Output Voltage | 0.75 V ±0.83 dB |
High Frequency Jitter | 0.3 ns |
CMRR | 1V RMS 1 to 250 MHz |
Clock Frequency | 125 MHz ±0.01% |
GPI In/Out | |
---|---|
Connector | 2 x 3 position screw terminal (Keystone 8739) |
Input Signal Level | +5 V |
Output Signal Level | ±75 V with reference to GPI out common |
Physical Characteristics | |
---|---|
Form Factor | 1RU |
Dimensions (H x W x D) | 1.75 x 19 x 24 in. (4.5 x 48.3 x 63.5cm) |
Power Consumption | Fully populated 300 W maximum |
Manufacturer | Imagine Communications |
---|