The DL-870-2CH Serial Digital Legalizer with Proc Amp offers the ultimate solution to the complex world of 3G, HD and SD signals. All popular 3G, HD and SD formats are accepted, with complete flexibility for legalization of 4:4:4 and 4:2:2 signals. The dual channel DL-870-2CH legalizes two HD/SD, or one Dual Link or 3G Dual Stream signal. The DL-870-2CH output format tracks the input format, and can be legalized to HD, SD, RGB, XYZ, and/or Encoded color space. CRC values are monitored and recalculated to ensure proper output values. Input EQ estimating cable length of the incoming video is displayed on the front panel. The instrument has a selection to pass or blank all ancillary data without any alteration except CRC correction.
Options
All of the DL-870-2CH processing controls and legalization limits are adjustable, allowing for many custom configurations to the HD Clips, SD Clips, Encoded gamut and RGB gamut limits. Also included is a 3G-SDI/HD-SDI/SD-SDI monitoring output with on screen gamut error indications. Stereoscopic 3D mode can flip one eye horizontally or vertically when using a mirror camera rig. EBU R 103 mode holds off correction when only a small number of pixels are out of range. Operation of the DL-870-2CH is straightforward, with the front panel OLED display and LED status indications, direct access function selection buttons, and easy menu navigation. All operational parameters, including the selectable bypass function, are also supported via Ethernet using the embedded Web server interface. The DL-870-2CH also supports CCS Navigator control and monitoring software, and SNMP remote control. A user-selectable alarm mask limits the gamut alarm and range indication to a selected picture area, and ignores errors that fall outside the mask. The DL-870-2CH can retain 20 presets with alpha numeric names up to 10 characters each on the front panel display, or web page display.
Specifications and designs are subject to change without notice
Video | |
---|---|
Input Formats | 1080p 60/59.94/50/30/29.97/25/24/23.98, 1080sf 30/25/29.97, 720p 60/59.94/50/30/29.97/25/24/23.98, 525i 59.94, 625i 50, 1080i 60/59.94/50; 8, 10, or 12 bits; HD dual link and 3G level B dual stream |
Connector | 2 BNC 75 ohms, female, terminating in 75 ohms |
Return Loss | 3G ≥8 dB 1.485 to 2.97 GHz HD ≥12 dB 270 MHz to 1.485 GHz SD ≥18 dB 5 to 270 MHz |
Equalization | 3G ≥100 m Belden 1694A HD ≥150 m of Belden 1694A SD ≥300 m of Belden 1694A |
Video Output | Format follows input |
Connector | 4 BNC 75 ohms, female, primary out relay bypass connected to Input (each channel) |
Output Level | 800 mV pk-pk ±10% into 75 ohms |
Return Loss | 3G ≥8 dB 1.485 to 2.97 GHz HD ≥12 dB 270 MHz to 1.485 GHz SD ≥18 dB 5 to 270 MHz |
CRC | Fully supported, per SMPTE ST 292 and ST 424, recalculated on output |
EDH | SD-SDI Fully supported, per SMPTE RP-165 |
Ancillary Data | User selection to pass or blank |
Control | |
---|---|
Remote | RJ-45 female, ethernet port 10/100 Base-T web browser interface, SNMP, or CCSP |
GPI | 26-pin high density D-sub selection for HD, SD, RGB and encoded legalization enable or disable bypass on or off selectable status indication of input data range error, by-pass status, HD gamut alarm, RGB gamut alarm, encoded gamut alarm, and SD gamut alarm |
Adjustments | |
---|---|
Proc Amp | Video gain, luminance gain, color gain, hue shift, black level |
Encoded | Luma lower clip, luma upper clip, composite lower, composite upper, chroma amplitude, NTSC setup level, encoded clip softness, vector clipRGB RGB maximum, RGB minimum, softness HD and SD Y lower clip, Y upper clip, Cb/Cr lower clip, Cb/Cr upper clip, softness, gamut alarm mask |
Mechanical | |
---|---|
Dimensions (H x W x D) | 1.74 x 8.46 x 13.12 in. (4.42 x 21.49 x 33.32 cm) |
Weight | 3.05 lbs (1.38 kg) |
Power Requirements | |
---|---|
Power Input | 12 VDC nominal (10.8 to 13.2 VDC) |
Power Consumption | 20 W nominal |
Environmental | |
---|---|
Operating Temperature | 0 to 50 C |
Storage Temperature | -40 to 65 C, non-operating |
Humidity | 0 to 90%, non-condensing |
Operating Altitude | 6562 ft (2000 m) |
Standard Accessories | Operator’s Manual, 2 power supplies |
Optional Accessories | DRT-5 dual rackmount Tray, BLK-5 Blank filler panel for either side |
Manufacturer | Imagine Communications |
---|