The VM-114H2C is a high-performance PoC switcher and distribution amplifier for HDMI and DGKat twisted pair signals. It reclocks and equalizes one of two selectable input signals (HDMI or DGKat twisted pair) and distributes it to two DGKat twisted pair and two HDMI outputs.
Kramer Electronics VM-114H2C 2x1:2+2 HDMI & DGKat with RS-232 & IR to HDMI & PoC Long-reach DGKat switchable DA
The VM-114H2C is a high-performance PoC switcher and distribution amplifier for HDMI and DGKat twisted pair signals. It reclocks and equalizes one of two selectable input signals (HDMI or DGKat twisted pair) and distributes it to two DGKat twisted pair and two HDMI outputs.
Max. Data Rate 6.75Gbps (2.25Gbps per graphic channel) (HDMI), 4.95Gbps (1.65Gbps per graphic channel) (DGKat).
HDTV Compatible.
HDCP Compliant.
DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
EDID Passthrough Passthrough algorithm ensures Plug and Play operation for HDMI source and display systems.
HDMI Support x.v.Color, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD (only on the TP inputs and outputs).
3D Pass-Through.
Kramer Equalization & re-Klocking Technology Rebuilds the digital signal to travel longer distances.
System Range Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using thirdparty shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
MAX. DATA RATE:: 6.75Gbps (2.25Gbps per graphic channel) (HDMI), 4.95Gbps (1.65Gbps per graphic channel) (DGKat).
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
CONTROLS: Input select button, EDID select button, panel lock button, RS-232, local and remote IR controls.
INDICATOR LEDs: IR communication, power, IN 1( HDMI), IN 2 (CAT 5), OUTPUT 1, 2, 3 and 4.
POWER CONSUMPTION: 12V DC, 910mA.
INCLUDED ACCESSORIES: Power supply, bracket installation kit, RC-IR3 infrared remote control transmitter.
Max. Data Rate 6.75Gbps (2.25Gbps per graphic channel) (HDMI), 4.95Gbps (1.65Gbps per graphic channel) (DGKat).
HDTV Compatible.
HDCP Compliant.
EDID Passthrough Passthrough algorithm ensures Plug and Play operation for HDMI source and display systems.
HDMI Support x.v.Color, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD (only on the TP inputs and outputs).
3D Pass-Through.
System Range Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using thirdparty shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
Active Input & Output LED Indicators.
Power Connect System A single connection to the transmitter or the receiver powers both units when the devices are within 90m (270ft) of each other.
Flexible Control Options Front panel buttons, RS-232, infrared control sensor, remote included.
DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
Kramer Equalization & re-Klocking Technology Rebuilds the digital signal to travel longer distances.