Kramer Electronics TP-580TD 4K60 4:2:0 DVI HDCP 2.2 Transmitter with RS-232 & IR over Long-Reach HDBaseT

Kramer Electronics TP-580TD 4K60 4:2:0 DVI HDCP 2.2 Transmitter with RS-232 & IR over Long-Reach HDBaseT

TP-580TD is a high-performance, long-reach HDBaseT transmitter for 4K@60Hz (4:2:0) HDMI, RS-232 and IR signals over twisted pair, via single-link DVI-I connection. The TP-580TD converts all input signals into the transmitted HDBaseT signal. It extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.

• High Performance Standard Extender Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. TP-580TD is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• Secured Operation Highly-secured operation is ensured by lockable wiring connectivity with protection against unintentional cable disconnection.
• HDMI Signal Extension HDCP 2.2 compliant, via single-link DVI-I connection. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID signals are passed through from the source to the display.
• I-EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Bidirectional RS-232 Extension Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost-effective Maintenance Status LED indicators for DVI and HDBT ports facilitate easy local maintenance and troubleshooting.
• Easy Installation Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.

• High Performance Standard Extender Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. TP-580TD is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• HDMI Signal Extension HDCP 2.2 compliant, via single-link DVI-I connection. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID signals are passed through from the source to the display.
• I-EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Bidirectional RS-232 Extension Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost-effective Maintenance Status LED indicators for DVI and HDBT ports facilitate easy local maintenance and troubleshooting.
• Easy Installation Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.
• 1 DVI-D On a DVI-I female connector
• 1 HDBaseT On an RJ-45 female connector
• 1 IR On a 3.5mm mini jack for IR link extension
• 1 RS-232 On a 9-pin D-sub connector for serial link extension and device firmware upgrade
• Compliance HDBaseT 1.0
• Max. Data Rate 10.2Gbps (3.4Gbps per graphic channel)
• Max. Supported Resolution 4K@60Hz (4:2:0) 24bpp
• Standards Compliance HDCP 2.2
• Baud Rate 115200
• Baud Rate 300 to 115200
• Source 12V DC, 2A.
• Consumption 12V DC, 275mA.
• Size DigiTOOLS
• Operating Temperature 0 to 40C (32 to 104F).
• Storage Temperature: -40 to +70C (-40 to 158F).
• Type Aluminum.
• Included Power supply unit.
• Secured Operation Highly-secured operation is ensured by lockable wiring connectivity with protection against unintentional cable disconnection.
• Up to 40m (130ft) At 4K@60Hz (4:2:0) (When using Kramer HDBaseT cables)
• Up to 70m (230ft) At full HD (1080p @60Hz 36bpp) (When using Kramer HDBaseT cables)
• Cooling Convection ventilation
• Humidity 10% to 90%, RHL non-condensing.
• HDMI Support Deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0.
• Product Dimensions:
  12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
  
• Shiping Dimensions:
  15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H
  
• Product Weight:
  0.3kg (0.6lbs) approx.
  
• Shipping Weight:
  0.7kg (1.5lbs) approx.
  

• Highly reliable, long-distance extension of high-quality professional AV signals via lockable cable connections
• Governmental market high-reliability AV extension applications
• Medical operation rooms and other critical AV extension applications
• Rental and Staging events