Shinbow SB-6335T HDMI Hdbaset Transmitter Up To 330 Feet (2-way Ir, Rs-232, HDMI)

Shinybow SB-6335R5 5-Play HDBaseT PoH Receiver up to 330 ft (100M) (Single LAN, 2-Way IR, RS-232, HDMI)

The SB-6335R5 HDBaseT Receiver can receive HDMI, IR remote in/out, RS-232 in/out, Ethernet and PoH (power over HDBaseT) from a HDBaseT transmitter via a single category cable for long distances up to 928 feet (100M) maximum. The SB-6335R5 uses CAT6, CAT6a or CAT7 (UTP or FTP) category cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This SB-6335R5 receiver provides higher quality full HD HDMI resolutions of 480i/p, 720p, 1080i/p that is identical to the source and to the HD destination display. HDBaseT receivers control signals are received via a category cable from the HDBaseT Transmitter.

Features:

• HDBaseT HDMI Receiver over single CAT6/6a/7 category LAN cable
• Extends HDMI, IR in/out, RS-232 in/out and (2) Ethernet ports, HDCP compliant
• Supports CAT6, CAT6a and CAT7 UTP/FTP category cable
• Supports link speeds of up to 3.4Gbps
• Supports digital RGB 36bits, V1.4a HDMI TMDS format
• Extends higher quality DVI video for 1920x1200 resolutions
• Supports HD High Definition full range resolutions of 480p, 720p 1080i/1080p
• Supports long distances up to 328 ft/100M between the HDBaseT Transmitter and HDBaseT Receiver
• Supports wall mount and rack mount installation for 19 inch 4U rack mount
• Supports DC input power with low power consumption (Full load 850mA)
• Optional universal power supply switch 50/60Hz,100~240VAC

Specifications:

• Type of Extender: HDBaseT Receiver for HDMI signal over a category LAN Cable
• Input Signals: HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
• HDBaseT Supportd: HDMI Standard, DVI and HDCP Compliant
• Video Supported: HDMI and DVI TMDS formats for 1920x1200 resolutions up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
• HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
• PoH Supported: HDBaseT Receiver with PoH (power over HDBaseT)
• Category Cable Supported: CAT6, CAT6a, CAT7 UTP/FTP cable
• Supportd HDMI Resolutiond: 480p, 720p, 1080i/1080p
• Scan Rate Accepted: Supports HDMI full HD Resolutions; Frequency 24Hz to 60Hz
• Control: (1) IR in/out, (1) IR in/out, (1) RS-232 and (1) LAN series interface
• IR Infrared Frequency: 38KHz
• Extender Distance: Up to 100M (CAT6)
• Safety Approvals: CE, FCC, VCCI, REACH & WEEE
• Dimensions (LxWxH): 5.31 x 5.11 x 1 in (135x130x26mm)
• Rack Mount: Uses a total of 10 pcs installed into one 19 inch rack mount
• Weight: 1.1 lb (Unit only) / 2.0 lb (Net)
• Power Consumption: Max 850mA (Full load 1080p-60Hz signal with use DC12V input)
• Power Supply: Optional Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240VAC)

Includes:

• SB-6335R5 HDBaseT Receiver console
• SB-100C IR Extender Receiver Cable (6.5ft (2M))
• SB-101C IR Extender Transmitter Cable (6.5ft (2M))
• SB-100 IR Extender Receiver Set
• SB-101 IR Extender Transmitter Set
• 1 in High wall mount pack (Part # WM-1INCH-L80MM)
• HDMI Locking Post Replacement Screws
• Users Guide
• Optional: AC/DC Adapter: 12VDC, 2A (universal power switch 50/60Hz,100~240VAC)

*Does not support ARC