Sony RMIP10 IP Remote Controller
With the RM-IP10, the BRC-H900, BRC-Z700, and BRC-Z330 can be controlled though an IP network. The use of the proper IP Control Interface Board, either the BRBK-IP10 or BRBK-IP7Z (depending on camera model) is also required for compatibility. This functionality allows for flexible configurations, and enables the installation of up to 112 units of BRC cameras and up to five units of RM-IP10 controller depending on customer requirements.
Manufacturer: Sony Pro
$1,900.35
Availability: In stock
SKU
RMIP10
Manufacturer: Sony Pro
Sony RMIP10 IP Remote Controller
Overview
Control of up to 112 BRC cameras via an IP network
The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network, or 7 cameras over a traditional VISCA-controlled network. Up to five remote control panels can share control of the system.
Easy-to-install control for BRC-H900, BRC-Z330 and BRC-Z700 cameras
The RM-IP10 is compatible with Sony's BRC-X400*1, SRG-X400*1, SRG-X120*1, BRC-X401*1,*2, SRG-201M2*1,*2, SRG-HD1M2*1,*2, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS cameras when they are fitted with the BRBK-IP10 option board, and the BRC-Z700 camera when it is fitted with the BRBK-IP7Z option board. Easy and economical installation and setup saves you time and cost.
*1 Requires firmware V2.17
*2 Model sold in China only
Features
Control of up to 112 BRC cameras via IP
The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network.
Additional ability to use VISCA control
The RM-IP10 can also control up to 7 BRC cameras over a traditional VISCA (Video System Control Architecture) network.
Compatible Sony cameras
The RM-IP10 is compatible with Sony's BRC-X400, SRG-X400, SRG-X120, BRC-X401*, SRG-201M2*, SRG-HD1M2*, BRC-H900, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS cameras when they are fitted with the BRBK-IP10 option board, and the BRC-Z700 camera when it is fitted with the BRBK-IP7Z option board.
*Model sold in China only
Simple RJ-45 (10Base-T/100Base-TX) connection for easy connection
The RM-IP10 links to an IP network with via a RJ-45 connector providing very easy, low cost and speedy installation.
PC configuration software supplied
The RM-IP10 provides for convenient configuration of system IPs and BRCs numbers, with location free configuration of anetwork.
Up to 5 controllers can operate on a single network
Up to 5 RM-IP10 control panels can be used on a single network allowing shared control and simultaneous multi-operator control of large camera systems.
Simultaneous Preset recall to all cameras under control
Instantaneous set-up of multiple cameras provides a big time saving for camera adjustments.
Specifications
Input/output connectors
| Control input/output | VISCA RS-232C OUT Connector : Mini DIN 8pin type VISCA RS-422 connector: 9-pin type LAN : RJ-45, 10BASE-T/100BASE-TX automatically detected Tally In/Contact Out: 9-pin type |
| Control signal format | 9,600 bps/38,400 bps (for RS-232C/RS-422 communication) VISCA over IP communication |
| Power Connector | JEITA type 4 (DC IN 12V) |
General
| Input voltage | 12V DC (10.8 to 13.2V DC) |
| Current consumption | 0.3A max. (at 12V DC), 3.6W |
| Operating temperature | 0? to 40 ? (32F to 104F ) |
| Storage temperature | -20? to 60 ? (-4F to 140F ) |
| Dimensions (W x H x D) | 391.3 mm x 165 mm x 145.9 mm (15 inches x 6 inches x 5 inches) |
| Mass | Approx. 950g (2 lb 15 oz) |
User Interface
| Display | No |
| Speed Control | No |
| Zoom Seesaw Lever | No |
| Zoom Ring of Joystick | Yes |
| Zoom Control selectable | Ring of Joystick |
| ASSIGN button | 0 |
| Kensington lock hole | No |
Camera Control
| Maximum IP Connections | 112 |
| Maximum Serial Connections | 7 |
| Control Protocol | VISCA over IP/VISCA RS-422/VISCA RS-232C switchable |
| max Controller qty (/sys) | 5 |
Direct Function of Buttons/Knobs
| Exposure mode selection | No |
| One-push white balance auto adjustment | No |
| One-push black balance auto adjustment | No |
| Toggle color bars output on/off | No |
| Toggle backlight compensation on/off | Yes |
| Toggle flicker compensation on/off | No |
| Display the status of iris,gain,shutter speed and zoom position | No |
| R gain and B gain adjustment | Yes *1 |
| R black and B black adjustment | Yes *1 |
| Master black adjustment | No |
| Detail level display | No |
| Detail level adjustment | No |
| Knee point display | No |
| Knee point adjustment | No |
| AE level display | No |
| AE level adjustment | No |
| Iris setting display | No |
| Iris value adjustment | Yes *1 |
| Gain setting display | No |
| Gain value adjustment | Yes *1 |
| Shutter speed display | No |
| Shutter speed adjustment | Yes *1 |
Supplied Accessories
| Supplied Accessories | Operating Instructions (1) AC Power Adapter (SONY)(1) AC power cord (1) CD-ROM (1) RS-422 connector plug (attached to the unit) (2) |
Notes
| *1 | Need multiple button/knob/DIP SW operation |
| Available functions/specifications depend on camera specification |
Manufacturer: Sony Pro
| UPC | 02724286030 |
|---|---|
| Manufacturer | Sony Pro |
Write Your Own Review
My Wish List
Last Added Items
You have no items in your wish list.