Kramer Electronics OSP-MM1 Optical MM 850nm 10G SFP+ Transceiver

Kramer Electronics OSP-MM1 Optical MM 850nm 10G SFP+ Transceiver

OSP-MM1 is a fiber optic transceiver for 850nm multimode signals. This standard pluggable SFP+ optical module has two LC connectors for reception and transmission of signals over two strands of multimode optical fiber.

• Certified Transceiver Kramer certified, hot-pluggable SFP+ optical module, for high-quality transmission of 10.2Gbps signal over multimode fiber cables, connecting 2 simplex multimode fiber strands via LC AP/UPC connectors.

• TRANSMITTER TYPE: VCSEL.
• OPTICAL TYPICAL MAXIMUM RECEIVER SENSITIVITY: -11.1dBm.
• PORTS: 2-strand simplex fiber optic LC(PC/UPC) connector.
  Note: Do not use with LC(APC) cable connectors.
• OPTICAL TYPICAL TRANSMISSION POWER: -2.5dBm.
• STANDARDS COMPLIANCE: IEEE 802.3ae, SFF-8431.
• LASER SAFETY COMPLIANCE: Laser Class I.
• REGULATORY CERTIFICATIONS: FDA CDRH 21 CFR 1040 and Laser Notice No. 50, UL and CUL EN60950-2:2007, RoHS6, EMC EN 55022 and EN 55024.
• OPERATING TEMPERATURE: 0 to 70C.
• STORAGE TEMPERATURE: -40 to 85C.
• HUMIDITY: 5% to 95% RH.
• POWER CONSUMPTION: 1W.
• Certified Transceiver Kramer certified, hot-pluggable SFP+ optical module, for high-quality transmission of 10.2Gbps signal over multimode fiber cables, connecting 2 simplex multimode fiber strands via LC AP/UPC connectors.
• OPTICAL TYPICAL MAXIMUM LOSS BUDGET: 8.6dB.
• OPTICAL LINE: Multi-mode G.651.1 compliant OFNR fiber.
• NOMINAL PEAK WAVELENGTH: 850nm.
• MAX. DATA RATE: 10.2Gbps.
• MAX. REACH: 3km (1.8 miles) over OM3 MM fiber.
• Product Dimensions:
  1.33cm x 5.70cm x 0.85cm (0.52" x 2.24" x 0.33" ) W, D, H
  
• Shiping Dimensions:
  12.60cm x 8.40cm x 4.10cm (4.96" x 3.31" x 1.61" ) W, D, H
  
• Product Weight:
  0.0kg (0.0lbs) approx.
  
• Shipping Weight:
  0.1kg (0.1lbs) approx.
  

• Optical reach extension
• Secured signal transport