Imagine OP+DAS+13D DAS6801+ DECODER/SYNC/PROC WITH FIBER TX...
Composite video and analog audio decoder/synchronizer/multiplexer with dual-slot back module, for use with FR6802+ series frames, Q-SEE-compliant, 1310 nm FP optical output
Manufacturer: Imagine Communications
$3,195.00
Availability: In stock
SKU
OP+DAS+13D
Manufacturer: Imagine Communications
Imagine OP+DAS+13D DAS6801+ DECODER/SYNC/PROC WITH FIBER TX (1310NM); Composite-to-SDI A/V decoder / synchronizer / processor with 4-ch audio mux/embedder, with fiber output (1310nm, SC connector), 2 discrete AES inputs and outputs (bal & unbal), includes double-slot backmodule, QSEE-compliant
Composite video and analog audio decoder/synchronizer/multiplexer with dual-slot back module, for use with FR6802+ series frames, Q-SEE-compliant, 1310 nm FP optical outputThe OP+DAS provides video and audio conversion from analog to digital, synchronizes the audio to the video, embeds the synchronized audio (four channels) into the SD-SDI video stream and transmits the resulting signal over a fiber optic interface.
Integrated processing amps provide for full processing of both video and audio signals. This module is the optical version of the OP+DAS.
This module can be controlled manually via card-edge controls or remotely using either CCS Navigator, third-party SNMP-based control applications, or HTTP Web browser (with QXFE-series frames only). The module is Q-SEE-compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame control applications, or HTTP Web browser (with QXFE-series frames only).
Features
- 2D video decoder as standard feature, upgradeable to 3D decoding (available as a software license-key option)
- 12-bit, 4x oversampling of input video
- Video frame synchronization
- User-adjustable input video processing for black level, gain, hue, and saturation
- Time-base correction
- Integrated audio processing (gain, invert, mute, channel swap, channel sum)
- Accepts composite analog video or SD-SDI inputs, with user-selectable input priority (can be used for simple failover protection of input signal)
- Relay bypass on SDI input for protection against loss of module power
- Up to four SDI component digital video outputs
- Four analog audio inputs
- Two discrete AES audio connections (balanced or unbalanced), independently user-configurable as either inputs or outputs
- Audio embedding of four channels (two analog pairs, two AES pairs, or one pair of each)
- Integrated video and audio test signal generators
- One fiber optic output: either single- or multimode
- Available in 1310 nm FP
- Standard SC/PC-type fiber optic connector
- Q-SEE-compliant
Specifications
Specifications and designs are subject to change without notice
| Serial Digital Video Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | BNC (IEC 169-8) |
| Standards | SMPTE 259M-C, 270 Mb/s, 525/625 component |
| Impedance | 75 ohms |
| Composite Analog Video Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | BNC (IEC 169-8) |
| Standards | NTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M |
| Impedance | 75 ohms |
| Reference Video Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | BNC (IEC 169-8) (frame only) |
| Impedance | 75 ohms |
| Analog Audio Input | |
|---|---|
| Number of Inputs | 4 |
| Connector | Weidmuller 22-pin |
| Input Analog Level | 28 to 12 dBu (in 1 dB increment) |
| AES Unbalanced Input | |
|---|---|
| Number of Inputs | 2 (shared) |
| Connector | BNC (IEC 169-8) |
| Standards | AES 3, SMPTE 276M |
| Impedance | 75 ohms |
| Input Audio Rate | PCM input: 32 to 108 kHz |
| Bits | 16, 20 or 24 |
| AES Balanced Input | |
|---|---|
| Number of Inputs | 2 (shared) |
| Connector | Weidmuller 22-pin |
| Impedance | 110 ohms +/-20% (0.1 to 6 MHz) |
| Input Audio Rate | PCM input: 32 to 108 kHz |
| Bits | 16, 20 or 24 |
| Serial Digital Video Output | |
|---|---|
| Number of Outputs | Up to 4 (some connections shared) |
| Standard | SMPTE 259M-C, 270 Mb/s, 525/625 component |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Fiber Optic Video Output | |
|---|---|
| Number of Outputs | 1 |
| Wavelengths (nm) | 1310 FP |
| Connector | SC/PC per IEC 61754-4-1 ST/PC (optional); FC/PC (optional) |
| Output Power | -7 dBm ±1 dBm FP |
| Extinction Ratio | 8 dB typical |
| AES Unbalanced Output | |
|---|---|
| Number of Outputs | 2 (shared) |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| AES Balanced Output | |
|---|---|
| Number of Outputs | 2 (shared) |
| Connector | Weidmuller 22-pin |
| Impedance | 110 ohms ±20% (0.1 to 6 MHz) |
| Power and Temperature | |
|---|---|
| Operating Temperature | 41 to 113 F (5 to 45 C) |
| Power Consumption | 12 W maximum |
Manufacturer: Imagine Communications
| Manufacturer | Imagine Communications |
|---|
Write Your Own Review
Check items to add to the cart or
My Wish List
Last Added Items
You have no items in your wish list.