Imagine OP+AVR+2+EXP 2 ANALOG VIDEO, 8 ANALOG AUDIO, RX EXPANSION
Imagine OP+AVR+2+EXP 2 ANALOG VIDEO, 8 ANALOG AUDIO, RX EXPANSION; 2 Analog video, 8 analog audio, Electrical Receiver, Double Slot, Daisy-chain expansion
2 video, 8 audio, AVR expansion (no optics)
The OP+AVR modules provide professional, broadcast-quality transport of multiple analog audio and video signals over a single fiber optic interface.
These modules are capable of transporting up to eight analog video channels and 64 analog audio channels over this fiber interface, using an innovative daisy-chain design to maximize the fiber optic bandwidth. Occupying two slots within the 6800+ frame, this solution allows for up to 20 independent analog video signals and 80 analog audio channels in a single 2RU frame.
Since the analog video is not decoded, phase information is kept intact, allow-ing applications such as black burst transport over long distances for genlock purposes.
The OP+AVR+2 modules support up to two video and eight audio channels. As well, an electrical-only expansion version of the OP+AVR+2 (OP+AVR+EXP) can be used along with an initial optical version to create a daisy-chained configuration capable of supporting up to eight video and 64 audio channels on a single optical channel.
Fiber optic receivers are available in both PIN (standard).
These modules can be controlled manually via card-edge controls or remotely using either CCS Navigator, third-party SNMP-based control applications, or HTTP Web browser (with QXFE-series frames only).
Features
- One fiber input: either single- or multi-mode
- Available with PIN receiver option
- Up to two composite video outputs (NTSC, PAL-B, PAL-M)
- Up to eight balanced analog audio outputs
- Electrical-only expansion module allow for daisy-chaining of up to eight receive modules
- Hot-swappable
- Occupies two slots in the 2RU FR6802+QXFE 6800+ frame or the standalone FR6800+MB 6800+ Mix Box
- HTTP control via Ethernet-equipped 6800+ 2RU frames
- Optional CCS Navigator applications for remote Ethernet PC-based status monitoring and control
- Standard SC/PC-type fiber optic connector
Specifications
Specifications and designs are subject to change without notice
| Optical Input | |
|---|---|
| Number of Inputs | 1 |
| Connector | SC optical connector |
| Input Level | >800 mV pk-pk differential |
| Wavelength | 1260 to 1620 nm |
| Overload | 0 dBm |
| Sensitivity | -20 dBm |
| Analog Composite Video Output | |
|---|---|
| Number of Outputs | 2 (75 ohms terminated) |
| Connector | BNC (IEC169-8) |
| Standard | NTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Signal Quantization | 12-bit |
| Impedance | 75 ohms |
| Return Loss | >40 dB to 6 MHz |
| DC Offset | >±50 mV |
| SNR | >54 dB RMS to 6 MHz |
| Analog Audio Output | |
|---|---|
| Number of Inputs | 8 mono channels |
| Connector | Weidmüller 24-pin locking header-socket pair |
| Output Audio Level | 28 to 16 dBu (adjustable in 2 dB increments) |
| Output Impedance | 66 ohms |
| Frequency Response | >±0.1 dB @ 0 dBFS (+28 dBu), 20 Hz to 20 kHz, typical |
| THD | >90 dB @ 1 kHz, -1 dBFS = +23 dBu (66 ohms) or -1 dBFS = +17 dBm (600 ohms), typical |
| SNR | >100 dB @ -60 dBFS |
| Cross talk | >95 dB, 20 Hz to 20 kHz, typical |
| Linearity | >±1.0 dB (to -100 dBFS), typical |
| Power and Temperature | |
|---|---|
| Operating Temperature | 41 to 113 F (5 to 45 C) |
| Power Consumption | >10 W |
| Start Up Time | >5 sec |
| Expansion Inputs (All Modules) | |
|---|---|
| Number of Inputs | 1 |
| Connector | BNC (IEC 169-8) |
| Standard | Proprietary |
| Impedance | 75 ohms |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Return Loss | >18 dB, 5 MHz to 1.5 GHz |
| DC Offset | 0 V ± 0.5 V |
| Rise and Fall Times | 0.4 to 1.5 ns |
| Overshoot | >10% |
| Jitter | >0.2 UI, pk-pk |
| Expansion Outputs (All Modules) | |
|---|---|
| Number of Outputs | 1 |
| Connector | BNC (IEC169-8) |
| Standard | Proprietary |
| Impedance | 75 ohms |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Return Loss | >18 dB, 5 MHz to 1.5 GHz |
| DC Offset | 0 V ± 0.5 V |
| Rise and Fall Times | 0.4 to 1.5 nS |
| Overshoot | >10% |
| Jitter | >0.2 UI, pk-pk |
| Manufacturer | Imagine Communications |
|---|
