Imagine OP+AES+OPT+16 SOFTKEY UPGRADE FOR 8CH TO 16CH OF AES ON...
SoftKey upgrade to convert OP+AEST/R+8+D into OP+AEST/R+16+D to provide 16 channels of AES support
Manufacturer: Imagine Communications
$500.00
Availability: In stock
SKU
OP+AES+OPT+16
Manufacturer: Imagine Communications
Imagine OP+AES+OPT+16 SOFTKEY UPGRADE FOR 8CH TO 16CH OF AES ON OP+AES; SoftKey upgrade to convert OP+AES+8+D into OP+AES+16+D to provide 16ch of AES support
SoftKey upgrade to convert OP+AEST/R+8+D into OP+AEST/R+16+D to provide 16 channels of AES supportThe OP+AES fiber optic modules offer an excellent solution for the easy and reliable transport of multiple AES audio channels over fiber, making them ideal for applications in outside broadcast (OB) vans, stadiums/arenas and event facilities.
Equipped with user-selectable receive or transmit capability, these modules are available in a configuration of 16 AES channels, and are capable of operating in bidirectional mode. The OP+AES modules also can be used in a daisy-chain or cascading application to carry 128 AES audio channels on a single wavelength — an ideal fiber optic solution for even the most demanding long-haul AES transport.
Features
- 16 AES channels input/output per module in bidirectional mode, and up to 128 AES unidirectional channels per wavelength in daisy-chain (cascade) mode
- Support for balanced or unbalanced AES input and output (balanced AES requires an external balun adapter)
- Sample rates from 30 to 96 kHz
- Optical power monitoring and alarm thresholds
- Full CCS control and monitoring
- Front and back hot-swappable capability
- 16-channel AES capability
- User-selectable receive or transmit capability
- Channel-by-channel selectable balanced/unbalanced capability
- Manual gain and mute support for audio output channels
- Front/back headphone jacks for content monitoring at card edge and at back module
Details
OP+AES modules are available in the following configurations:
- 8 or 16 AES channels
- Fiber optic output in FP 1310 nm
- Coaxial expansion (daisy chain) or bidirectional modes
Specifications
Specifications and designs are subject to change without notice
| Optical Performance | |
|---|---|
| TX: | |
| Average Output Power (FP) | -5 dBm (typical) |
| RX: | |
| Input Wavelength | 1260 to 1620 nm |
| Sensitivity | -20 dBm |
| Expansion Serial Input | |
|---|---|
| Number | 1 |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >15 dB from 5 to 1485 MHz |
| Equalization | HD-adaptive cable equalization for up to 492 ft (150 m) (typical) of Belden 1694A coaxial cable |
| Expansion Serial Output | |
|---|---|
| Number | 1 |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >15 dB from 5 to 1485 MHz |
| D.C. Offset | 0 V ±0.5 V |
| Signal Level | 800 mV ±10% |
| Rise/Fall Time | <270 ps (20-80%) |
| Overshoot/Undershoot | <10% |
| Jitter | <1 UI pk-pk timing jitter (>10 Hz); <0.2 UI pk-pk alignment jitter (>100 kHz) |
| AES Unbalanced | |
|---|---|
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6.0 MHz |
| Sensitivity | <100 mV |
| Input Audio Rate | 30 to 96 kHz |
| AES Balanced | |
|---|---|
| Connector | XLR with external balun |
| Sensitivity | <200 mV |
| Impedance | 110 ohms ±20% (0.1 to 6 MHz) |
| Maximum Input Signal | 10 V (pk-pk) |
| Common Mode Rejection | 0 V to 7 V (0 to 20 kHz) |
| Input Audio Rate | 30 to 96 kHz |
| AES Unbalanced | |
|---|---|
| Standard | AES 3, SMPTE 276M |
| Type | Unbalanced, AC coupled |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6 MHz |
| Signal Amplitude | 1 V pk-pk 10% into 75 ohms load |
| Audio Rate | 30 to 96 kHz |
| Rise/Fall Time | 30 to 44 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| Channel Status and User Bit | Maintained |
| AES Balanced Output | |
|---|---|
| Type | Balanced, transformer coupled |
| Connector | XLR with external balun |
| Impedance | 110 ohms 20% (0.1 to 6 MHz) |
| Signal Amplitude | 2 to 7 V pk-to-pk into 110 ohms load |
| Audio Rate | 30 to 96 kHz |
| Jitter | ±20 ns |
| Rise and Fall Time | 5 to 30 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| Channel Status and User Bits | Maintained |
| Propagation Delay | |
|---|---|
| Sampling Rate Propagation Delay | |
| (AES In to Out) | 32 kHz to 6.2 ms 48 kHz to 4.2 ms 96 kHz to 2.1 ms |
| Power Consumption | <8 W |
| AES Balanced Output | |
|---|---|
| Type | Balanced, transformer coupled |
| Connector | XLR with external balun |
| Impedance | 110 ohms 20% (0.1 to 6 MHz) |
| Signal Amplitude | 2 to 7 V pk-pk into 110 ohms load |
| Audio Rate | 30 to 96 kHz |
| Jitter | ±20 ns |
| Rise and Fall Time | 5 to 30 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| Channel Status and User Bits | Maintained |
| Propagation Delay | |
|---|---|
| Sampling Rate Propagation | |
| Delay (AES In to Out) | 32 kHz to6.2 ms 48 kHz to 4.2 ms 96 kHz to 2.1 ms |
| Start-Up Time | <10 sec |
| Temperature | 32 to 113 F (0 to 45 C) |
Manufacturer: Imagine Communications
| Manufacturer | Imagine Communications |
|---|
Write Your Own Review
Check items to add to the cart or
My Wish List
Last Added Items
You have no items in your wish list.