Imagine NXPM190A NEXIO+ MEDIA I/O HOST TURNKEY APPLIANCE. MAY...
Imagine NXPM190A NEXIO+ MEDIA I/O HOST TURNKEY APPLIANCE. MAY REQUIRE FC-HBA AND/OR 1/10GBE NIC SOLD SEPARATELY; NEXIO+ MEDIA I/O HOST (MIOH) TURNKEY APPLIANCE. FIBRE CHANNEL HBA AND/OR 2X 10GB ETHERNET NIC AND/OR 4X 1GB ETHETNET NIC SOLD SEPARATELY AS REQUIRED BY CUSTOMER TOPOLOGY. 32GB, REDUNDANT 2X OS SSD, 4X 1GB ETHERNET INCLUDED; WINDOWS EMBEDDED SERVER 2012 R2 STANDARD
Nexio+ Media I/O Host turnkey appliance. May require FC-HBA and/or 1/10GBE NIC sold separately.Nexio Media Host is a high-performance appliance for Nexio configurations with large numbers of Nexio I/O clients connected to Nexio shared storage.
The Media Host architecture bridges Nexio’s Fibre Channel storage protocol for data transfer so that it can run over Ethernet. This eliminates the Fibre Channel connection limit as a restriction on the number of clients that can share Nexio storage. As a result, as many servers and editors can share access to the Nexio SAN as are supported by the available storage bandwidth. Nexio Media Host supports Nexio Farad and Nexio NXS3100 Series SAN storage systems.
Features
- Performance - Makes full SAN bandwidth available without limitations
- Nexio Farad supports up to 24 Fibre Channel Nexio clients, but Media Host can extend this to support hundreds of Nexio clients over Ethernet (up to the storage bandwidth limit, presently 32,000 Mb/s)
- Nexio NXS3100 Series storage supports up to 13 Fibre Channel Nexio clients, but Media Host can extend this to support hundreds of Nexio clients over Ethernet (up to the storage bandwidth limit of 8400 Mb/s)
- High Availability
- N+1 redundancy for seamless Media Host failover
- Uses redundant Ethernet and Fibre Channel connectivity for all Media Host servers
- Enables redundant Ethernet connectivity for Media Host clients
- Data Protection
- Media Hosts run RAIDsoft to support RAID-601 storage protection for Nexio Farad storage
- Media Hosts run RAIDsoft to support RAID-3, ECC Parity, and Intrinsic Mirroring storage protection for Nexio NXS3100 Series storage
- For Nexio NXS3100 Series storage, Media Hosts act as software RAID controllers and work in concert to rebuild drives
- Economy
- Extends fibre channel storage access connectivity over industry-standard, relatively inexpensive Ethernet network infrastructure
Details
The Media Host architecture uses two or more Media Host NX1010MIOH servers in an N+1 redundant configuration. Storage is connected via Fibre Channel to the Media Host servers, which then connect via Ethernet to I/O nodes such as the Nexio AMP and Nexio Volt video servers. The Nexio client systems send and receive their data through the Media Host servers. This approach allows hundreds of HD channels and dozens of editors to attach to a single storage domain.
Nexio Media Host is available with 10-Gigabit and 1-Gigabit Ethernet interface configurations, with Nexio Farad supporting the 10-Gigabit version. The 10-Gigabit Ethernet configuration delivers an average of 4000 Mbps of data throughput, and the 1-Gigabit Ethernet version delivers 1400 Mbps of data throughput.
The Media Host architecture features redundancy in the event that a Media Host server fails. Data and protocol information are seamlessly and automatically re-routed though the available Media Host servers in the event that one goes off line. Media Host server redundancy includes hot-swappable power supplies and a two-port 8-Gbps Fibre Channel adapter that supports redundant connectivity to the Nexio SAN. Ethernet ports support redundant connectivity for the Nexio LAN and supply video data to connecting Nexio I/O nodes
Specifications
Specifications and designs are subject to change without notice
| System Configuration | |
|---|---|
| Server Hardware Features | 1RU Rack Mount 1+1 redundant hot-swappable power supply, 800W (100-240VAC) or 1400W (200-240VAC) High CFM cooling for 24/7 operation 2 Intel Xeon 64-bit Haswell 6-core processors 32 GB DDR4 RAM expandable to 1536 GB 1+1 redundant front-mounted hot-swappable OS SSDs 4x 1GbE Ethernet Ports Optional additional 4x 1GbE, or 2x 10GbE, or 2x 40GbE Ethernet Ports 1x VGA monitor port 3 USB 3.0 ports (1 front, 2 rear) Dedicated Hewlett Packard Enterprise Integrated Lights-Out (iLO) Ethernet Port Windows Server 2012 R2 Standard 64-bit Embedded OS |
| Server Physical Attributes | |
|---|---|
| Dimensions | 8 SFF and 10 SFF 1.7 x 17.1 x 27.5 inches (4.32 x 43.47 x 69.85 cm) |
| Weight (approximate) | Minimum (one hard drive, power supply, and processor installed): 8SFF Model 27lb. (12.25 kg) |
| Maximum (all hard drives, power supply, and processor installed): 8 SFF Model 33.3 lb. (15.31 kg) Note: Includes 2 SFF Option for a total of 10 SFF HDD |
|
| Power & Cooling | |||
|---|---|---|---|
| BTU Rating | For 800W Power Supply: 3207 BTU/hr (at 100 VAC), 3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at 240 VAC) for China Only | ||
| Power Supply Output | Rated Steady-State Power: | For 1400W Power Supply: 1400W (at 240 VAC), 1400W (at 240 VAC For 800W Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VAC) input for China only |
|
| Maximum Peak Power: | For 1400W Power Supply: 1400W (at 200 to 240 1VAC), 1400W (at 240 VAC) input for China only For 800W Power Supply: 800W (at 100 to 127 VAC), 800W (at 200 to 240 1VAC), 800W (at 240 VAC) input for China only |
||
| Emissions Classification (EMC) | FCC Rating | Class A |
| Normative Standards | CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 |
| System Inlet Temperature | Standard Operating Support: | 10 to 35C (50 to 95F) at sea level with an altitude derating of 1.0C per every 305 m (1.8F per every 1000ft) above sea level to a maximum of 3050 m (10,000ft), no direct sustained sunlight. Maximum rate of change is 20C/hr (36F/hr). The upper limit and rate of change may be limited by the type and number of options installed. Note: System performance during standard operating support may be reduced if operating with a fan fault or above 30C (86F). |
| Relative Humidity | Operating: | Minimum to be the higher (more moisture) of -12C (10.4F) dew point or 8% relative humidity. Maximum to be the lower (less moisture) of 24C (75.2F) dew point or 90% relative humidity. |
| Non-operating: | 5 to 95% relative humidity (Rh), 38.7C (101.7F) maximum wet bulb temperature, non-condensing. |
| Altitude | Operating: | 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
| Non-operating: | 9144 m (30,000ft). Maximum allowable altitude change rate is 457 m/min (1500ft/min). |
| Acoustic Noise | ||
|---|---|---|
| Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). | ||
| Idle | Operating | |
| L WAd | (1P non-redundant) 4.6 A Average Bystander (2P redundant) 5.5 A Average Bystander |
(1P non-redundant) 4.6 A Average Bystander (2P redundant) 6.2 C Average Bystander |
| L pAm | (1P non-redundant) 29 dBA (2P redundant) 37 dBA |
(1P non-redundant) 30 dBA (2P redundant) 46 dBA |
| Note: 1P Configuration tested included two Intel E5-2630 v3, 2.3GHz processors, one 500GB SAS HDD, five standard hot plug fans, one 8GB DDR4 RDIMM's 2133MHz, one 500W power supply. 2P Configuration tested included two Intel E5-2650 v3, 2.6GHz processors, one 500GB SAS HDD, seven standard hot plug fans, two 16GB DDR4 RDIMM's 2133MHz, one 500W power supply, P440ar HDD controller PCI card with 2GB cache. Performance of system, options, and ancillary equipment will vary depending on the system configuration. | ||
| Inputs and Outputs | |
|---|---|
| RS-422, TCP/UDP Protocols, and GPI Control | |
| Serial Ports | Optional 8x RS-422 RJ12 ports. Includes cables and RJ12->DB9 adapters |
| GPI I/O 8 | Optional 16x GPI input, 16x GPI output |
| Sony BVW (9-pin) Protocol | TCP/IP, UDP Ethernet; RS-422 serial |
| Nexio Native Control Protocol | TCP/IP, UDP Ethernet; RS-422 serial |
| Video Disk Control Protocol (VDCP) | TCP/IP Ethernet; RS-422 serial |
| Simple Network Management Protocol (SNMP) | UDP Ethernet |
| SYSLOG Operating System and Application Message Logging | TCP/IP Ethernet |
| Media I/O Performance and Options | 2 Gigabit Ethernet I/O ports for Nexio LAN connection Nexio Client Data Connectivity via: Four 1-Gigabit Ethernet I/O ports (requires optional 4-port 1-GbE LOM) OR Two 10-Gigabit Ethernet I/O ports (requires optional 2-port 10GbE LOM) OR Two 40-Gigabit Ethernet I/O ports (requires optional 2-port 40GbE LOM) Nexio Fibre Channel SAN Connection requires optional 2-port 8-Gbit Fibre Channel I/O PCIe HBA |
| Performance | Gigabit Ethernet Interface: 700 Mbps per port pair 1 pair = 700Mbps total I/O 2 pairs = 1400Mbps total I/O 10-Gigabit Ethernet Interface: 4000 Mbps total I/O |
| Manufacturer | Imagine Communications |
|---|
