LYNX Yellobrik ORX-1802-LC 3G Fiber to SDI Optic Rx w/ dual SDI out LC connectors

LYNX Yellobrik 3Gbit Fiber to SDI Optical Receiver with dual SDI output with Fiber LC connectors

Features:

• Supports SDI video up to 3Gbit/s (1080p60)
• 2 x SDI outputs
• Error free optical reception
• Versions for LC, ST or SC fiber connections
• Multimode version available
• Input range 1260nm - 1620nm (singlemode)
• Input range 780nm - 880nm (multimode)
• Supports hot swapping and hot plugging

Description

Using the same basic module we provide four versions suitable for LC, ST or SC singlemode fiber connections, as well as a version for multimode fiber. Each version has a different SFP installed.

The ORX 1802 is a compact fiber optic receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.

When paired with the fiber optic transmitters (e.g. yellobrik OTX 1812 or OTX 1842) this module provides a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s), while preserving full uncompressed quality.

The ORX 1802 provides two SDI outputs and support  for LC, ST or SC singlemode fiber connections as well as an LC version suitable for multimode fiber.

The ORX 1802 is compatible with any video signal according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards, as well as DVB-ASI.

Technical Specifications

Fiber Input   1 x fiber optic Input

Singlemode   LC, ST or SC connection

SMPTE 297M - 2006

Input range (wavelength) 1260nm to 1620nm

RX sensitivity -3dBm to -19dBm

RX active LED on side of module

Fiber Input

multimode

1 x Fiber Optic Input

LC Connection

SMPTE 297M - 2006

Input range (wavelength) 780nm to 880nm

RX sensitivity 0dBm to -15dBm

RX active LED on side of module

SDI Output

2 x SDI video on 75 Ohm BNC connectors

SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI

Multi-standard operation from 270Mbit/s to 3Gbit/s

Return Loss: > 15dB to 1.5GHz and > 10dB up to 3GHz

Power            

 +12VDC power supply (included)

Supports external power input from 9 - 14 VDC

Power LED on side of module

Power Consumption 1.4W

Size

105mm x 40mm x 22mm ( 4.13” x 1.57”  x 0.86”)

Model #

ORX 1802 LC, ORX 1802 ST, ORX 1802 SC (singlemode)

ORX 1802 MM (multimode)

Includes         

Module, 12V DC power supply and plastic transport case