48 Programmable Hard Buttons: For IR and/or RF ZigBee commandsprogrammable via USB on PC or Mac with Compass Navigator PC Software
Programming Support: Unlimited macro and variable actions
ZigBee Signal Transmission: Up to 100 through walls, doors and floors
Device Control: Up to 10 devices with line-of-sight IR control orRF Wireless 2.4 GHz ZigBee control
Backlight: Motion detected automatic backlighting. The backlight will turn onwhen movement is detected and will stay on for five seconds after movementhas stopped
USB: Recharging and Programming
Multiple System Modes:
Idle Mode: Power Saving mode while remote is not in use
Active Mode: Device switches to Active Mode after a button is pressed.Stays in Active Mode for 5 seconds
Low Battery Mode: Activated when the battery has dropped below 2.4V
Configuration Mode: To setup and configure the remote
Indication Keys (On/Off):
Low Battery indicator: Power OFF LED blinks every one second while in activemode
Battery Charging indicator: Power ON LED blinks every one second while inactive mode
Full Charge indicator: Both Power ON and OFF LEDs blink every one secondwhile in active mode
Configuration Mode indicator: Both Power ON and OFF LEDs are steadilyilluminated
7 Device Keys: The selected Device Key LED will remain illuminated to indicatewhich device is selected