Sescom IL-19-HUM-DROP Pro Audio Hum Eliminator 6-Channel Snake Box with Isolation

Sescom IL-19-HUM-DROP Pro Audio Hum Eliminator 6-Channel Snake Box with Isolation

The Only Product that Removes All Types of Hum in Live Sound & Pro-Audio Gear!
IL-19-HUM-DROP - 6 Channel Snake Box version of our World Renowned Industry Standard IL-19

The HUM-DROP is designed for stage, or at the Front of House (FOH), or anywhere 6 channels of hum elimination are desired. Designed to be rugged and plugged in to a cable run at either end and can simply be left on the floor under the mixing board or at the stage. Usually it is installed at the end of long cable runs for microphone or line level audio signals, but it can be installed anywhere in the signal path, not just at either end of a cable run.

Designed as 3 products in-one, the Sescom IL-19 is the industry standard for instantly reducing audio hum problems in live sound & broadcast applications providing quick fix line isolation to stop noise at the source. This 6 channel version features female XLR balanced inputs and male XLR outputs. Removes ground loop hum, mode noise & differentially induced hum without the need for multiple transformers, ground lifters or phase inverters. Other in-line problem solvers solve only one problem at a time.

Sescom transformers are specifically engineered for flatter and broader frequency response allowing a hotter signal throughput without saturation. Sescom transformers also provide superior protection against radiated noise thus reducing pickup of hum and interference from outside sources such as power supplies. The IL-19-HUM-DROP keeps unwanted signals out of the circuit, but also reduces induced noise providing high-quality line level isolation to eliminate hum and buzz from interacting gear.

Not for use with phantom power devices.

Features:

• Inputs which accept XLR connectors
• Perfect for use with: Live Sound Equipment; Radio & Broadcast Audio
• Line Level Equipment Interface
• Decoupling Lines to Reduce Hum
• Isolating Drive Lines to On-Stage Power Amps
• Long Line Cable Runs

Specifications:

• Nominal Target I/O Levels: -16dB to +8dB*
• *No Lower Limit / Upper Limit: Approx. +24dB
• Nominal Input Impedance: 600 ohms
• Nominal Output Impedance: 600 ohms
• Frequency Response: +/- 1db at 20hz to 20khz Input & Output Device Dependent

Warranty:

• 1 Year