Shape Sony FS7M2 v-lock quick release baseplate - FS72BP

Shape Sony FS7M2 v-lock quick release baseplate - FS72BP

The SHAPE  V-Lock Quick Release Baseplate is a long format baseplate and it can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for ARRI standard handles. It has 1/4″-20 and 3/8″-16 tripod mount threads and a V-lock delta adapter for attaching SHAPE VCT Tripod Plate (VCTSH) or any VCT-14 tripod plate.

The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. A pair of 8″ 15 mm rods are included for the front. For attaching a matte box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15 mm Studio and 19 mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4″-20 and 3/8″-16 screws. The off-center slots allow you to mount your camera offset if you use a 15 mm Studio Adapter. 1/4″-20 and 3/8″-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4″-20 and two 3/8″-16 camera mount screws are included.



Spare pad for BP series (BP0050)

The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the BP SERIES v-lock quick release baseplate (BP0008, BP8000, BP7000). The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder.


Sony FS7 & Sony PXW-FS7 mark II rear insert plate (FS7RIP)

The Sony FS7 Rear Insert Plate from SHAPE is an aluminum rear support plate designed for use with the Sony FS7M2 or FS7 cameras. The plate mounts to the camera body via three included screws and provides necessary support when the camera is used with the SHAPE V-lock quick release baseplate.


15 mm 8" rods (15TUBE8)

Pair of 15 mm rods 8″ long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminum tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn’t perfectly aligned or is at a slight angle to the rod clamp.

Features

• Compatible with Sony FS7M2
  
• Made of CNC Machined Aluminum
  
• Design to be shoulder or tripod mounted
  
• Compatible with 15 mm lightweight and (15  or 19) mm LWS brackets
  
• Let you adjust your rod height bloc to match your camera’s optical center
  
• Protective rubber pads to protect your camera
  
• Designed with 2 standard Arri rosettes for handles mount
  
• Designed with 3 camera mount slots
  
• 1/4″-20 and 3/8″-16 accessory mount threads
  
• Removable velcro shoulder pad
  
• 15mm (8’’) rods at the front
  
• Quick release adapter plate compatible with VCT-14 tripod plate
  
• Rear plate to support the camera

What's in the Box:

• (1) V-LOCK QUICK RELEASE BASEPLATE
• (1) REAR INSERT PLATE (FS7RIP)
• (1) REMOVABLE SHOULDER PAD (BP0050)
• (1 PAIR) 15MM RODS 8 INCHES