Imagine ENC6801+D SD TO ANALOG VIDEO 12-BIT DIGITAL ENCODER WITH...

SDI to NTSC/PAL encoder, module and double-slot rear connector for use in FR6802+ series frames, Q-SEE-compliant
Manufacturer: Imagine Communications
$1,000.00
Availability: In stock
SKU
ENC6801+D
Manufacturer: Imagine Communications

Imagine ENC6801+D SD TO ANALOG VIDEO 12-BIT DIGITAL ENCODER WITH LINE SYNC, WI; SD to Analog Video 12-bit Digital Encoder with line sync, with double-slot rear connector, QSEE-compliant

SDI to NTSC/PAL encoder, module and double-slot rear connector for use in FR6802+ series frames, Q-SEE-compliant

The ENC6801+D encoder is a high-precision, 12-bit digital encoder that supports NTSC, PAL-B and PAL-M standards.

Standard selection is automatic for 525-line NTSC and 625-line PAL standards. The high-quality encoding is ideal for use in the primary broadcast path, as well as for monitoring purposes.

Part of the 6800+ core processing frame, the ENC6801+D module can be cco-ntrolled manually via card-edge controls, or controlled and monitored via the CCS Navigator software application, HTTP web browser, or third-party SNMP-based control applications. The module is Q-SEE-compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame.

Features

  • Line synchronization within a three-line window
  • Encodes 4:2:2 digital video into a composite analog signal
  • 12-bit digital internal processing, output over-sampled at 54 MHz
  • Provides four composite outputs and two SDI reclocked outputs
  • Automatic selection between NTSC, PAL-M and PAL-B standards, with settings shadowed and restored
  • Genlock input on module or frame genlock can be used for reference
  • Color-frame locked if used with external Genlock
  • Jitter removal
  • EDH detection
  • Vertical blanking field/line/mode control:
  • Line 10 to 21 (NTSC/PAL-M), lines 6 to 23 (PAL-B)
  • Adjustable level controls (luminance, chrominance, black)
  • Adjustment for ±180 chrominance phase
  • SCH offset (0/180 for NTSC, 0/90/180/270 for PAL)
  • Pedestal on/off selection (with starting line selection)
  • Supports card-edge and remote control of module (via CCS Navigator, web browser and third-party SNMP-based control applications)
  • Q-SEE-compliant

Specifications

Specifications and designs are subject to change without notice

SDI Input
Standards SMPTE 259M-C, 270 Mb/s, 525/625 component
Connector BNC per IEC 169-8
Impedance 75 ohms
Return Loss >18 dB to clock frequency
Signal Level 800 mV ±10%
CMRR 30 V pk-pk, up to 60 Hz
Equalization Automatic up to: >23 dB, 259M-C type
SDI Output
Standards SMPTE 259M-C, 270 Mb/s, 525/625 component
Number 2
Connector BNC per IEC 169-8
Impedance 75 ohms
Return Loss >18 dB to clock frequency
Signal Level 800 mV ±10%
DC Offset 0 V ±0.5 V
Drive Capability Up to 250 m for Belden 8281
Composite Analog Outputs
Standards NTSC, PAL-B, PAL-M
Number 4
Impedance 75 ohms
Return Loss >40 dB to 5.75 MHz
Quantizing 12-bits
Frequency Response ±0.15 dB to 5.5 MHz
Differential Gain <1% (typically <0.5%)
Differential Phase <1 (typically <0.5)
DC Offset ±5 mV
Chroma/Luma delay <1.5 ns
Chroma/Luma gain ±1.5%
Luma Non-linearity <0.2%
Signal to Noise >60 dB RMS with bandwidth 10 kHz to full
Vertical Blanking 10 to 21 lines for NTSC for both fields (field 2: 272 to 283)
6 to 23 lines for PAL for both fields (field 2: 318 to 335)
Reference Input
Level 1 V pk-pk
Signal Type Analog composite NTSC/PAL-B
Connector BNC
Impedance 75 ohms
Return Loss >40 dB to 6 MHz
Power Consumption 6.7 W
Manufacturer: Imagine Communications
More Information
ManufacturerImagine Communications
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite