The ECM-V1BMP lavalier electret condenser microphone is supplied with, and compatible with, the Sony UWP and UWP-D bodypack transmitters.
Capsule Type | Electret Condenser |
Frequency Response | 40 Hz to 20 kHz |
Directivity | Omni-directional |
Sensitivity *[1] | -43.0 3 dB |
Output Impedance *[2] | 1.2kO30%, Unbalanced |
Dynamic Range | 86 dB or more |
Signal-to-Noise Ratio *[3] | 60 dB or more |
Inherent Noise *[4] | 34 dB SPL or less |
Maximum Input Sound Pressure Level *[5] | 120 dB SPL |
Connector | BMP type. Supplied with o3.5 mm, 3-pole mini plug. |
Mic Cable | 3.9 feet 1.2 m |
Power Requirements | DC 5 V |
Power Consumption | 0.2 mA or less |
Dimensions *[6] | f9/32 x 25/32 inches f6.8 x 19.5 mm |
Mass | Approx. 16.2 g Approx. 0.57 oz |
Supplied Accessories | Urethane type windscreen (3) Single/horizontal type tie clip (1) |
Optional Accessories | UWP wind screens (x12) for use with ECM-V1 BPM UWP lav mic clips (x2) for use with ECM-V1 BPM or ECM-X7BMP |
Note | *[1] 0 dB = 1 V/Pa, at 1 kHz *[2] Output impedance at 1 kHz *[3] A-weighted, 1 kHz, 1 Pa. *[4] 0 dB SPL = 20 Pa. *[5] 0 dB SPL = 20 Pa. *[6] The values for dimensions are approximate. |
UPC | 27242764903 |
---|---|
Manufacturer | Sony Pro |