Sony ECM66BC Uni-Directional Electret Condenser Mic
The design of the ECM-66BC yields clean, natural reproduction of musical instruments while maintaining excellent isolation from the acoustic environment. Unlike most miniature microphones, this mic has a uni-directional polar pattern, carefully contoured for better control of feedback. The higher voltage supplied to the microphone by the built in DC to DC converter increases the maximum input sound pressure level to an amazing 130 dB SPL.
Manufacturer: Sony Pro
$282.90
Availability: In stock
SKU
ECM66BC
Manufacturer: Sony Pro
Sony ECM66BC Uni-Directional Electret Condenser Mic
Overview
The ECM-66B miniature, lapel microphone is suitable for voice and musical instrument pick-up in noisy environments. The cardioid polar response allows the microphone to be positioned for picking up the sound source while rejecting background noises. It is supplied with a integral power barrel and it is terminated with an XLR connector.
Features
Designed for a wide range of audio sources
The ECM-66B's capsule features an extended frequency response and it can handle high SPL signals.
Compact size
The capsule has a diameter of only 10.6mm and is 24mm long, making it easy to conceal.
Ready for wired applications
The ECM-66B is the wired microphone version with an XLR output and integral power supply barrel. It can either be powered by the external microphone amp or an internal battery (LR6/AA size).
Specifications
Audio Section
| Capsule Type | Electret Condenser |
| Frequency Response | 70 Hz to 14 kHz |
| Directivity | Uni-directional |
| Sensitivity *[1] | -36.5dB 2 dB |
| Output Impedance *[2] | 2.5kO30%, Unbalanced |
| Dynamic Range | 101 dB or more |
| Signal-to-Noise Ratio *[3] | 65 dB or more |
| Inherent Noise *[4] | 29 dB SPL or less |
| Induction Noise From External Magnetic Field *[5] | 5 dB SPL or less |
| Wind Noise *[6] | 50 dB SPL or less (with windscreen) |
| Maximum Input Sound Pressure Level *[7] | 130 dB SPL |
General Section
| Connector | BC type. Supplied with Sony 4-pin (SMC9-4P) connector |
| Mic Cable | 3.9 feet 1.2 m |
| Power Requirements | DC 1.1 V to 10.0 V |
| Power Consumption | 0.4 mA or less |
| Dimensions *[8] | o7/16 X 31/32 inches (Mic head) o10.6 X 24.2 mm (Mic head) |
| Mass | Approx. 31.2 g Approx. 1.1 oz |
| Supplied Accessories | Urethane type windscreen (1) Single/vertical type tie clip (1) Single/horizontal type tie clip (1) Operating instructions (1) Mic case (1) |
| Optional Accessories | Wind screen pack Horizontal single-clip pack |
Notes
| Note | *[1] 0 dB = 1 V/Pa, at 1 kHz *[2] Output impedance at 1 kHz *[3] A-weighted, 1 kHz, 1 Pa. *[4] 0dB SPL = 20? Pa. *[5] dB SPL/1E-7 T, 0 dB SPL = 20? Pa. *[6] Wind noise at 2m/s (0 dB SPL = 20?Pa.) *[7] 0 dB SPL = 20? Pa. *[8] The values for dimensions are approximate. |
Manufacturer: Sony Pro
| Manufacturer | Sony Pro |
|---|
Write Your Own Review
My Wish List
Last Added Items
You have no items in your wish list.