Shape Composite Sony f5-f55 - COMPOF5-F55

Adjustable & lightweight shoulder mount camera rig system_x000D_ Unique patented SHAPE QUICK HANDLE push-button technology_x000D_ SHAPE PAPARAZZI RISER with several threaded holes (1/4-20” and 3/8-16”)_x000D_ Compatible with all 15 mm rod systems_x000D_ Length-adjustable rods using red knobs on SHAPE ROD BLOCs_x000D_ Height-adjustable SHAPE SLIDING ROD BLOC using black knob_x000D_ Perfect for DSLRs and video cameras
Manufacturer: SHAPE
$593.21
Availability: In stock
SKU
COMPOF5-F55
Manufacturer: SHAPE

Shape Composite Sony f5-f55 - COMPOF5-F55

The SHAPE COMPOSITE F5 F55 shoulder mount camera rig was primarily designed for DSLRs and video cameras. This easy-to-use ergonomic design is simple to adjust and customize according to your specific needs. It enables a fast transition from tripod to shoulder in one simple click. Quick and easy setup with a 4 mm Allen key (5/32 in). Each support module can be assembled or disassembled easily for travel. No tools required.



Quick handle rod bloc (HAND5)

The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle.
SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock.


Paparazzi riser 15 mm rod system (ROD2)

Use the SHAPE Paparazzi Riser/15 mm Rod System as a base to attach accessories to your DSLR or small camcorder. This system displaces the weight of accessories from the camera to the rods/riser. The Paparazzi riser adds 2″ to the camera height while its mounting-screw slot allows for up to 4″ of front-to-back adjustment. The 15 mm rod system offers thumbscrew-locking 8″ rods with Allen key vertical adjustment (up to 1.375″). This riser/rod system can work with various on-camera accessories such as a lens support, matte box, lens adapter, or follow focus.
The Paparazzi Riser from SHAPE is a 2″ fixed-height camera riser offering either parallel or perpendicular camera support. The riser’s top surface includes a 4″ sliding screw slot that enables the camera to be adjusted front-to-back or side-to-side, depending on the riser’s orientation. This Paparazzi Riser features several 1/4″-20 and 3/8″-16 threaded holes. The hole located on the base is used to attach the riser to a camera support, while the front and rear holes can be used to attach various accessories such as a sliding rod block.


Pair of rod 15 mm female-female rod (8") (2ROD15FF8)

The SHAPE pair of 15 mm 8″ female-female rods are anodized aluminum rods with 1/2″-13 threaded female extremities. The rods are 8″ (203mm) long and have a diameter of 0.59″ (15 mm). It is compatible with 15 mm 4″ or 6″ male-female rods, rod bloc, and sliding rod Bloc.



Paparazzi with Bloc (PA001BLOC)



The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4″ screws. The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid — not at all hollow — and are both water cut / laser cut, as opposed to being molded. The 20 screw-holes are a mix of 1/4″, 3/8″ and 1/2″ sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4″ and 3/8″ holes can take on most any 1/4″ and 3/8″ accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2″ holes you can screw in male-threaded SHAPE rods (2ROD15MF4, 2ROD15MF6) . The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.




Pair of rod 15 mm female-female rod (8") (2ROD15FF8)

The SHAPE pair of 15 mm 8″ female-female rods are anodized aluminum rods with 1/2″-13 threaded female extremities. The rods are 8″ (203mm) long and have a diameter of 0.59″ (15 mm). It is compatible with 15 mm 4″ or 6″ male-female rods, rod bloc, and sliding rod Bloc.


Composite mini shoulder pad (SHPAD3)

The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently.


Back pad (PAD1)

The back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights.

Features

  • Adjustable & lightweight shoulder mount camera rig system
  • Unique patented SHAPE QUICK HANDLE push-button technology
  • SHAPE PAPARAZZI RISER with several threaded holes (1/4-20” and 3/8-16”)
  • Compatible with all 15 mm rod systems
  • Length-adjustable rods using red knobs on SHAPE ROD BLOCs
  • Height-adjustable SHAPE SLIDING ROD BLOC using black knob
  • Perfect for DSLRs and video cameras

What's in the Box:

  • (1) PAPARAZZI RISER BRIDGE WITH 15 MM ROD BLOC SYSTEM
  • (1 PAIR) OF RUBBER QUICK HANDLE WITH 15MM ROD BLOC AND PUSH-BUTTON
  • (1) COMPOSITE SHOULDER PAD (SHPAD3)
  • (1) BACK PAD
  • (1) MALE SCREW KNOB ¼-20
  • (2 PAIRS) 15 MM FEMALE-FEMALE RODS 8 INCHES

Manufacturer: SHAPE
More Information
UPC629266000236
ManufacturerSHAPE
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite