Made specifically for the Canon EOS C100 C300 C500 cameras_x000D_
Provides a smaller, lighter setup solution expandable to a more elaborate setup_x000D_
Features a pair of 15 mm rods that are 12†long through the length of the baseplate (15TUBE12)_x000D_
Attaches underneath the camera with 4 x M4 screws (included) OR with 3/8†16 and 1/4†20 screws (included)_x000D_
14-20 & 3/8-16 threaded holes included for tripod plate attachment_x000D_
Not compatible with the Canon C200
The SHAPE C300 Baseplate is made specifically for the Canon EOS C100 C300 C500 cameras. This camera accessory provides a small, light setup solution expandable to a more elaborate setup. It features a pair of 15 mm rods that are 12" long through the length of the baseplate. The baseplate attaches underneath the camera with 4 x M4 screws or with 3/8â€-16 and 1/4â€-20 screws that are included. The baseplate maintains the proper lens center to the rod height for use with available rod mounted accessories. This allows you to use available standard follow focus units, zoom motors, and matte boxes with your camera while using the baseplate.
15 mm 12" rods (15TUBE12)
This pair of SHAPE 15 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.
Features
Made specifically for the Canon EOS C100 C300 C500 cameras
Provides a smaller, lighter setup solution expandable to a more elaborate setup
Features a pair of 15 mm rods that are 12†long through the length of the baseplate (15TUBE12)
Attaches underneath the camera with 4 x M4 screws (included) OR with 3/8†16 and 1/4†20 screws (included)
14-20 & 3/8-16 threaded holes included for tripod plate attachment