Made of solid and robust CNC machined aluminum_x000D_
15 mm LW Rod System designed to respect the C200 optical center_x000D_
Ratchet key knobs to reposition the rod bloc system_x000D_
Features a pair of 15 mm rods 12" through the length of the baseplate_x000D_
Attaches underneath the camera with 3/8-16 and ¼-20 screws_x000D_
4 points attachment to strongly secure the camera and for tripod plate attachment (3 x ¼-20 and 1x 3/8-16)_x000D_
4 rubber pads at the top of the base to protect and securely sit your C200 Camera;_x000D_
Designed with an adapter plate featuring several ¼-20 and 3/8-16 threaded holes_x000D_
Adapter plate is perfect to optimize your C200 camera balance on a tripod, gimbal or drone_x000D_
The Allen key is easily accessible and securely magnet-fixed at the bottom of the Baseplate
The SHAPE Baseplate is designed for use with the Canon C200 camera. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes. Unscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1/4"-20 and 3/8"-16 threaded holes, suitable for optimizing your C200 camera balance on a tripod, gimbal, or drone.
15 mm 12" rods (15TUBE12)
This pair of SHAPE 15 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.
Features
Made of solid and robust CNC machined aluminum
15 mm LW Rod System designed to respect the C200 optical center
Ratchet key knobs to reposition the rod bloc system
Features a pair of 15 mm rods 12" through the length of the baseplate
Attaches underneath the camera with 3/8-16 and ¼-20 screws
4 points attachment to strongly secure the camera and for tripod plate attachment (3 x ¼-20 and 1x 3/8-16)
4 rubber pads at the top of the base to protect and securely sit your C200 Camera;
Designed with an adapter plate featuring several ¼-20 and 3/8-16 threaded holes
Adapter plate is perfect to optimize your C200 camera balance on a tripod, gimbal or drone
The Allen key is easily accessible and securely magnet-fixed at the bottom of the Baseplate