Shape Sony A7S II - A7R II - A7 II 15 mm LW - ALPCAGEROD

Form-Fitting Cage with Top Handle_x000D_ Access to All Controls, Ports, and Slots_x000D_ Camera Will Not Rotate When Secured_x000D_ Multiple 1/4''-20 and 3/8''-16 Threads_x000D_ Cold Shoe Mount on Top_x000D_ 1/4''-20 Tripod Thread on Base_x000D_ HDMI Cable Protector Lock_x000D_ Metabones EF Adapter Support Bracket_x000D_ Compatible with Sony XLR-K2M XLR Adapter_x000D_ Quick Release Baseplate with 15 mm Rods
Manufacturer: SHAPE
$450.65
Availability: In stock
SKU
ALPCAGEROD
Manufacturer: SHAPE

Shape Sony A7S II - A7R II - A7 II 15 mm LW - ALPCAGEROD



Sony A7S II - A7R II - A7 II cage (ALPCAGE)

Sony Alpha cage designed for the Sony A7S II,  A7R II and A7 II mirrorless digital 4k camera. The cage is designed to give easy access to the control buttons, the side outputs and the battery compartment; which is an important thing when you are shooting. You will not waste any time removing the camera from the cage to access the memory card or to change the battery. An important feature of this cage is the micro-HDMI cable protector lock on the side to secure the use of your HDMI 4K cable. By leaving access open to the hot shoe on top of the camera, you can mount different accessories. This cage is compatible with the Sony XLR-K2M audio unit, so you can have great sound for your videos. There’s also another hot shoe on the top of the cage available for accessory attachments. You can attach the SHAPE handle with the red Push-Button (ALPHAND). Integrated in the cage, there is a Metabones® adapter support bracket. When there is no Metabones® adapter, the ¼-20 screw is captive so you don’t have to remove it from the cage and simply slide the bracket from under the cage.
The cage is easy to assemble and disassemble and you don’t need to remove any parts of it when you want to install the camera. The camera is fixed with a ¼-20 screw with the threaded hole under it, and the position is secured with the back and the sides of the cage so it will not move forward when equipped with a heavier lens. You can also attach a delta adapter plate underneath the cage to mount the cage on a quick release and easily change from a tripod to a handheld setup. In addition to having access to all camera controls, you also have easy access to the lens release button. The support between the lens and the camera grip is designed to anticipate a clearing for the fingers when the camera is handheld, for an ergonomic grip. The cage features several ¼-20 and 3/8-16 threaded holes for attachments and is made from CNC machined aluminum.


15 mm 10" rods (15TUBE10)

This pair of SHAPE 15 mm Aluminum Rods (10″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 15 mm in diameter, 10 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.


Quick Release Baseplate
The quick release baseplate can be used as a table stand or can be attached to a tripod. The bottom of the base block designed with a removable Metabones® Support Bracket perfect to support heavier lens. The rod bloc travel height is adjustable with an Allan Key to allow an optimal adjustment of your matte box, Follow Focus and optical center.

Sony A7S II - A7R II - A7 II top handle
The top handle is designed for SHAPE A7S II, A7R II, and A7 II cage and features the unique patented SHAPE red Push-Button technology. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the top handle in the best position for your use. Push, adjust, release, and then its lock. It is designed to be installed on the hot shoe adapter on our cage and fixed with a screw. The handle sides features several 1/4-20 and 3/8-16 threaded holes for accessory attachment.

Features

  • Form-Fitting Cage with Top Handle
  • Access to All Controls, Ports, and Slots
  • Camera Will Not Rotate When Secured
  • Multiple 1/4''-20 and 3/8''-16 Threads
  • Cold Shoe Mount on Top
  • 1/4''-20 Tripod Thread on Base
  • HDMI Cable Protector Lock
  • Metabones EF Adapter Support Bracket
  • Compatible with Sony XLR-K2M XLR Adapter
  • Quick Release Baseplate with 15 mm Rods

What's in the Box:

  • (1) CAGE
  • (1) TOP HANDLE WITH PUSH-BUTTON
  • (1) QUICK RELEASE BASEPLATE WITH 15MM ROD BLOC SYSTEM
  • (1 PAIR) 15MM RODS 10 INCHES

Manufacturer: SHAPE
More Information
UPC629266005033
ManufacturerSHAPE
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite