The VS-211HA is a high-performance automatic standby switcher for HDMI video and unbalanced stereo audio signals. The VS-211HA can be used as a manual 2x1 switcher or automatic switcher. The switcher uses a priority input or last connected input.
Kramer Electronics VS-211HA 2x1 HDMI Auto Switcher with Audio
The VS-211HA is a high-performance automatic standby switcher for HDMI video and unbalanced stereo audio signals. The VS-211HA can be used as a manual 2x1 switcher or automatic switcher. The switcher uses a priority input or last connected input.
Max. Data Rate 6.75Gbps (2.25Gbps per graphic channel).
HDMI & HDCP Compliant.
HDTV Compatible.
Advanced Auto Switching Based on video clock detection.
Automatic Output Shutdown If no input signal is detected after a configurable idle period.
3D Pass Through.
EDID PassThru Passes EDID signals from display to source.
Audio Return Channel (ARC) Pass Through.
Parallel Unbalanced Stereo Audio Switching.
Contact Closure Remote Control For manual switching override.
DIP-Switches For setting the switching mode.
Specifications:
INPUTS: 2 HDMI connectors, 2 unbalanced stereo audio on 3.5mm mini jacks.
OUTPUTS: 1 HDMI connector, 1 unbalanced stereo audio on a 3.5mm mini jack.
MAX. DATA RATE: 6.75Gbps (2.25Gbps per graphic channel).
COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
CONTROLS: Contact closure on a 3-pin terminal block, 2 priority DIP-switches.
INDICATORS: ON and active input LEDs.
POWER CONSUMPTION: 5V DC, 120mA (without load), 350mA (fully loaded).
OPERATING TEMPERATURE: 0 to +40C (32 to 104F).
STORAGE TEMPERATURE: -40 to +70C (-40 to 158F).
HUMIDITY: 10% to 90%, RHL non-condensing.
INCLUDED ACCESSORIES: Power supply.
Max. Data Rate 6.75Gbps (2.25Gbps per graphic channel).
HDTV Compatible.
HDMI & HDCP Compliant.
3D Pass Through.
EDID PassThru Passes EDID signals from display to source.
Audio Return Channel (ARC) Pass Through.
Parallel Unbalanced Stereo Audio Switching.
Automatic Output Shutdown If no input signal is detected after a configurable idle period.
Contact Closure Remote Control For manual switching override.
DIP-Switches For setting the switching mode.
Advanced Auto Switching Based on video clock detection.