Kramer Electronics VP-100 Computer Graphics Video to RGB/HV/S Format Converter

Kramer Electronics VP-100 Computer Graphics Video to RGB/HV/S Format Converter

The VP-100 is a high-performance format converter for computer graphics video signals. It converts a computer graphics video signal on a 15-pin HD connector to either RGBS, RGsB, or RGBHV video signals on BNC connectors.

• High Bandwidth 350MHz (-3dB).
• Control H/V sync shift & sync selection.
• Looping Input.
• Selectable Input Signal Termination.
• ID Bit Control.
• EQ (Peaking) Control.
• Active Line Amplification Circuitry.

• High Bandwidth 350MHz (-3dB).
• Control H/V sync shift & sync selection.
• Looping Input.
• Selectable Input Signal Termination.
• ID Bit Control.
• EQ (Peaking) Control.
• Active Line Amplification Circuitry.
• INPUT: 1 analog red, green, blue signals: 0.7Vpp/75?, H & V sync, TTL level, with loop on 15-pin HD (F) connectors.
• OUTPUTS: 1 analog red, green (with or without composite sync), blue signals: 0.7 Vpp/75?; H & V syncs: TTL level (Hi-Z load) or analog level (75? load) on BNC connectors; 1 composite sync: TTL levels (Hi-Z load) or analog level (75? load).
• VIDEO BANDWIDTH (-3dB): 350MHz.
• DIFF. GAIN: 0.07%.
• DIFF. PHASE: 0.03Deg.
• K-FACTOR: 0.05%.
• VIDEO S/N RATIO: 71dB.
• CONTROLS: Cable EQ, H & V sync shift, G/sync on green switch, Hs/Cs switch, ID bit switch, input termination switch.
• EQ. CONTROL: 0 to +9.7dB @5MHz.
• POWER CONSUMPTION: 12V DC, 60mA.
• INCLUDED ACCESSORIES: Power supply, mounting bracket.
• Product Dimensions:
  12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
  
• Shiping Dimensions:
  23.20cm x 12.00cm x 8.90cm (9.13" x 4.72" x 3.50" ) W, D, H
  
• Product Weight:
  0.0kg (0.0lbs) approx.
  
• Shipping Weight:
  0.6kg (1.3lbs) approx.
  

• Any professional display system requiring up to UXGA signal splitting and conversion to BNC connectors.
• Long distance graphics signal distribution.