Kramer Electronics TP-582T 2x1 HDMI switchable Transmitter with Ethernet, RS-232 & IR over Extended-Reach HDBaseT

Kramer Electronics TP-582T 2x1 HDMI switchable Transmitter with Ethernet, RS-232 & IR over Extended-Reach HDBaseT

TP-582T is a high-performance, extended-reach HDBaseT switchable transmitter for 1080p60Hz HDMI, Ethernet, RS-232 and IR signals over twisted pair. The TP-582T converts all input signals into the transmitted HDBaseT signal. It extends video signals to up to 130m (430ft) over CAT copper cables at up to 1080p@60Hz 36bpp video resolution. The TP-582R converts the HDBaseT twisted pair signal back to Ethernet, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs.

• High Performance Standard Extender Switchable, professional HDBaseT extender for providing extended-reach signals over twisted-pair copper infrastructures. TP-582T is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• HDMI Signal Extension HDCP 2.2 compliant. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, and 3D. EDID signals are passed through from the source to the display.
• I-EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension Up to 8 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Ethernet Extension Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS-232 Extension Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Simple Control Operation Easy selection of input video signals for its extension, locally via front panel button, or remotely via either remote IR control or control buttons connected to rear panel contact closures.
• Cost-effective Maintenance Status LED indicators for HDMI and HDBT ports facilitate easy local maintenance and troubleshooting.
• Easy and Elegant Installation Compact MegaTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter.

• High Performance Standard Extender Switchable, professional HDBaseT extender for providing extended-reach signals over twisted-pair copper infrastructures. TP-582T is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• I-EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Extension Up to 8 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Cost-effective Maintenance Status LED indicators for HDMI and HDBT ports facilitate easy local maintenance and troubleshooting.
• Easy and Elegant Installation Compact MegaTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter.
• INPUTS: 2 HDMI on HDMI connectors,
  1 remote IR sensor,
  2 remote contact closures on a 3-pin terminal block connector.
• OUTPUT: 1 HDBT on an RJ-45 female connector.
• VIDEO: Up to 6.75Gbps bandwidth (2.25Gbps per graphic channel),
  Up to 1080p@60Hz 36bpp resolution,
  HDCP 2.2 signal compliance.
• EXTENDED ETHERNET: Up to 100Mbps extended line rate bandwidth.
• POWER CONSUMPTION: 5V DC, 800mA.
• INCLUDED ACCESSORIES: Power supply 5V/4A, bracket installation kit.
• Ethernet Extension Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS-232 Extension Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• HDMI Signal Extension HDCP 2.2 compliant. Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, and 3D. EDID signals are passed through from the source to the display.
• PORTS: 1 IR on a 3.5mm mini jack for IR link extension,
  1 RS-232 on a 9-pin D-sub connector for serial link extension,
  1 10Base-T/100BaseTx Ethernet on an RJ-45 female connector for LAN extension.
• EXTENSION LINE: HDBaseT 1.0 compliant;
  up to 130m (430ft) at full HD (1080p @60Hz 36bpp);
  Note: When using Kramer HDBaseT cables.
• EXTENDED RS-232: 300 to 115200 baud rate.
• POWER SOURCE: 5V DC, 4A.
• ENCLOSURE: Mega Tools size, aluminum type.
• COOLING: Convection ventilation.
• Simple Control Operation Easy selection of input video signals for its extension, locally via front panel button, or remotely via either remote IR control or control buttons connected to rear panel contact closures.
• Product Dimensions:
  

• Long-distance AV and LAN signal extension for multi-room, large dividable auditoriums and lecture hall connectivity
• AV and LAN extension in conference rooms, boardrooms, control rooms, hotels and large church facilities