Telecast CH3BAI-3400-D25-7XL3F Base audio input breakout cable...

Telecast CH3BAI-3400-D25-7XL3F Base audio input breakout cable with coms - CH3BAI-3400-D25-7XL3F

Key Features

• All camera signals on one lightweight fiber cable


• Long distance range (multiple kilometers)


• Three uncompressed HD-SDI signals from camera to base:
  
  
  
  • Two 1.5 to 3 Gb/s paths for dual link or 3D cameras
  
  
  • One 1.5 Gb/s path for monitoring and/or menus
  
  
  
  


• Four bi-directional data streams
  
  
  
  • Two RS-422 paths
  
  
  • One RS-232 path
  
  
  • One 10/100 Ethernet path
  
  
  
  


• Genlock


• Two-way audio and intercom


• Anton/Bauer and V-Battery options


• Wide temperature range


• Low power consumption


• Two fiber cable options
  
  
  
  • Tactical fiber: military specification, battery/local power
  
  
  • Hybrid fiber (SMPTE 311M):
    
    
    
    • PowerWafer - low voltage - 95W to 240m (787 ft.)
    
    
    • PowerPlus - high voltage - 100/150W to 2 km (1.2 mi.)
    
    
    
    
  
  
  
  

Specifications

• Interface: SMPTE 424M, 292M, 259M


• Data rate: 3 Gbps, 1.5 Gb/s, or 270 Mb/s

• Interface: SMPTE 259M, 292M


• Data rate: 270 Mb/s or 1.5 Gb/s

• Input level: 800 mV p-p


• I/O impedance: 75Ω


• Output impedance: 75Ω


• Bit-error rate at -22 dBm: 10-12


• Jitter (pathological data): <0.2 UI


• Rise/fall times: <270 ps

• Interface: RS-170, NTSC, PAL


• Frequency response: 30 Hz - 4.2 MHz: ±0.25 dB


• 8 MHz: -3 dB


• Video signal to noise ratio: ≥70 dB


• Differential gain: <2%


• Differential phase: <2°

• Data support: 10BaseT/100BaseT


• Connector: Twisted pair RJ45


• Cable compatible: UTP 100Ω Cat5


• I/O impedance: 10 kΩ / 30Ω

• Number of channels: 2


• Input level at camera unit, switchable:
  
  
  
  • Line: 4 dB
  
  
  • MIC: -60 dB or -10 dB
  
  
  
  


• Impedance: >15 kΩ


• Maximum input level: 24 dBu


• Sampling: 24 bits, 128X (oversampled), 48 kS/s


• Frequency response: ±0.1 dB, 20 Hz to 20 kHz


• Output at base station: Line level

• Number of channels: 4


• Input level at base station: Line level


• Output at camera unit: Line level

• Number or channels: 2


• Interface types (base): RTS, Clear-Com or 4-Wire


• Frequency response: 200-18 kHz, ±3 dB


• Max distortion: ≤0.5 %


• Noise: <-60 dBu


• Max gain (RTS or Clear-Com): ≥24 dB


• Min gain (RTS or Clear-Com): ≤-45 dB

• Operating wavelength, standard: 1310 nm


• Nominal optical loss budget values:
  
  
  
  • Tx laser output power (std): 0 dBm
  
  
  • Rx sensitivity, HD-SDI: -22 dBm
  
  
  
  


• Fiber compatibility: Single-mode


• Optical connector options - camera unit:
  
  
  
  • Local power: MX or opticalCON
  
  
  • Remote power: Short range power: SMPTE 304M or opticalCON
  
  
  • Long range power: SMPTE 304M
  
  
  
  


• Optical connector options - base station:
  
  
  
  • Unpowered cable (TAC Cable): OpticalCON
  
  
  • Remote power - carrying cable (hybrid fiber/wire): Standard Power: SMPTE 304M, OpticalCON
  
  
  
  

• TAC Cable (local power at camera): Standard laser: 15 dB optical budget


• SMPTE 311M hybrid fiber:
  
  
  
  • Standard internal power supply w/PowerWafer: ~ 300m (984 ft.), 95W at 12 VDC*
  
  
  • Long range, HDX w/PowerPlus, LP: ~2 km (6,562 ft.), 100W cont. / 150W peak*
  
  
  
  

• Dimensions (W x H x D):
  
  
  
  • Camera unit: 63.5 x 55.9 x 165.1 mm (2.5 x 2.2 x 6.5 in.)
  
  
  • Base station: 444.5 x 44.5 x 228.6 mm (17.5 x 1.75 x 9 in.)
  
  
  • PowerWafer: 127 x 55.9 x 155.5 mm (5 x 2.2 x 6.12 in.)
  
  
  • PowerPlus LP (100W): 127 x 63.5 x 152.4 mm (5 x 2.5 x 6 in.)
  
  
  • PowerPlus HP (150W): 127 x 94 x 152.4 mm(5 x 3.7 x 6 in.)
  
  
  • HDX: 330.2 x 215.9 x 88.9 mm (13 x 8.5 x 3.5 in.)
  
  
  
  


• Weight:
  
  
  
  • Camera unit: 0.68 kg (1.5 lbs.)
  
  
  • Base station: 2.27 kg (5 lbs.)
  
  
  • PowerWafer: 0.68 kg (1.5 lbs.)
  
  
  • PowerPlus: LP: 1.04 kg (2.3 lbs.), HP: 1.13 kg (2.5 lbs.)
  
  
  • HDX: 4.76 kg (10.5 lbs.)
  
  
  
  


• Power consumption:
  
  
  
  • Camera unit: 8 W at 10-18 VDC
  
  
  • Base station (TAC Cable): 10 W at 10-18 VDC
  
  
  
  


• Temperature range: -25° to 55° C (with internal fan enabled)


• Humidity range: 0 to 95% RH, non-condensing


• Max noise level: 16 dBA (Fan ON)

Diagram