Kramer Electronics SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat

Kramer Electronics SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat

The SID-X1N is a DGKat twisted pair transmitter and step-in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes a Step-In button that allows the local source to be routed as the active source on the main display through the main switcher.

• Max. Data Rate 4.95Gbps (1.65Gbps per graphics channel).
• Compatible Switcher VP-81SIDN.
• HDTV Compatible.
• HDCP Compliant. Works with sources that support HDCP repeater mode.
• HDMI Support x.v.Color and 3D.
• EDID Passthrough Passthrough algorithm ensures Plug and Play operation for HDMI source and display systems.
• Data Equalization and Reclocking.
• Input Signal Detection Based on video clock presence.
• Automatic Input Selection Based on manual selection or last connected input.
• Automatic Analog Audio Detection and Embedding.
• Local Balanced Audio De-embedding.
• Support for Digital Audio Formats.
• Lockable EDID.
• DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• Cable Requires STP (shielded twisted pair) cable. For optimum range and performance, use shielded Kramer CAT 6 or CAT 7 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Power Connect System A single connection to the transmitter powers both units when the devices are within 150ft (50m) of each other.
• Local Step-In Switching Button & contact closure.
• Power Supply Requires independent power supply.

• HDTV Compatible.
• Local Step-In Switching Button & contact closure.
• Compatible Switcher VP-81SIDN.
• DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
• Power Supply Requires independent power supply.
• Cable Requires STP (shielded twisted pair) cable. For optimum range and performance, use shielded Kramer CAT 6 or CAT 7 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• HDCP Compliant. Works with sources that support HDCP repeater mode.
• Max. Data Rate 4.95Gbps (1.65Gbps per graphics channel).
• HDMI Support x.v.Color and 3D.
• Input Signal Detection Based on video clock presence.
• Automatic Input Selection Based on manual selection or last connected input.
• Automatic Analog Audio Detection and Embedding.
• Lockable EDID.
• Data Equalization and Reclocking.
• Support for Digital Audio Formats.
• Local Balanced Audio De-embedding.
• Power Connect System A single connection to the transmitter powers both units when the devices are within 150ft (50m) of each other.
• EDID Passthrough Passthrough algorithm ensures Plug and Play operation for HDMI source and display systems.
• INPUTS: 1 HDMI on an HDMI connector, 1 DP on a DisplayPort connector, 1 DVI-D on a DVI-I connector
  1 VGA on a 15-pin HD (F) connector, 1 unbalanced stereo audio on a 3.5mm mini jack.
• OUTPUTS: 1 twisted pair on an RJ-45, 1 unbalanced stereo audio in a 3.5mm mini jack.
• PORTS: 1 RS-232 3-pin terminal block for programming.
• CONTROLS: Front panel buttons, remote step-in switch, remote input selection switches.
• ANALOG AUDIO INPUT: Maximum level - 3Vpp.
• REMOTE LED IMPEDANCE: 5V, 300? approx.
• STANDARDS: HDMI with x.v.Color and 3D; HDCP: works with sources that support HDCP repeater mode.
• MAXIMUM DATA RATE: 4.95Gbps (1.65Gb per graphics channel).
• MAXIMUM STEP-IN DISTANCE: 50m (164ft) up to 1080p @60Hz @24bpp.
• POWER CONSUMPTION: 12V DC, 1.1A.
• COMPLIANCE STANDARDS: CE, UL.
• OPERATING TEMPERATURE: 0 to +40C (32 to 104F).
• STORAGE TEMPERATURE: 40 to +70C (40 to 158F).
• HUMIDITY: 10% to 90%, RHL non-condensing.
• COOLING: Convection, vents.
• ENCLOSURE TYPE: Aluminum.
• INCLUDED ACCESSORIES: Power adapter.
• Product Dimensions:
  

• Boardrooms.
• Presentation rooms.