The SID−X1 is a DGKat twisted pair transmitter and step−in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes a Step−In button that allows the local source to be routed as the active source on the main display through the main switcher.
Kramer Electronics SID-X1 4-Input Multi-Format Video over Twisted Pair Transmitter & Step-In Module
The SID−X1 is a DGKat twisted pair transmitter and step−in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes a Step−In button that allows the local source to be routed as the active source on the main display through the main switcher.
HDTV Compatible.
HDCP Compliant.
DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
Cable Requires STP (shielded twisted pair) cable. For optimum range and performance, use shielded Kramer CAT 6 and CAT 7 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Local Step-In Switching Button & contact closure.
Compatible Switcher VP-81SID.
Power Supply Requires independent power supply.
Compact MegaTOOLS 2 units can be rack mounted side-by-side in a 1U rack space with the recommended rack adapter.
Specifications:
INPUTS: 1 HDMI, 1 DVI on a Molex 24-pin connector, 1 DisplayPort, 1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack.
POWER CONSUMPTION: 12V DC, 800mA.
INCLUDED ACCESSORIES: Power supply.
OUTPUT: 1 DGKat on an RJ-45 connector.
HDTV Compatible.
Local Step-In Switching Button & contact closure.
Compatible Switcher VP-81SID.
DGKat Signal Integration Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
Compact MegaTOOLS 2 units can be rack mounted side-by-side in a 1U rack space with the recommended rack adapter.
Power Supply Requires independent power supply.
Cable Requires STP (shielded twisted pair) cable. For optimum range and performance, use shielded Kramer CAT 6 and CAT 7 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
HDCP Compliant.
STANDARDS: HDMI with Deep Color, x.v.Color and 3D; HDCP: works with sources that support HDCP repeater mode.
MAXIMUM STEP-IN DISTANCE: 50m (164ft) up to 1080p @60Hz.