Sescom SES-DMX1BK1000FT BELDEN DMX 512 Lighting Control Cable 24 AWG 4 Conductor -Black- 1000 Feet

Sescom SES-DMX1BK1000FT BELDEN DMX 512 Lighting Control Cable 24 AWG 4 Conductor -Black- 1000 Feet

Sescom DMX1BK DMX lighting control cable sets the standard for a low-capacitance data pair in long distance DMX applications. It will always deliver true RS-485 data transmission and it features handy color-coded conductors for ease of installation.

True DMX lighting control cable is based on RS-485 data cable, a 120O impedance and a capacitance of 12.5 pF/ft. or less. Many lighting designers use 100O cables for DMX because those cables are smaller, cheaper and easier to find. The impedance mismatch and higher capacitance will make them distance-limited compared to true RS-485. Among the 100O cable types are the premise/data cables such as Category 5, Category 5e, Category 6 and Category 6A. Using this cable for DMX is not the same as lighting control run with Ethernet, which use these same Category cables but in a completely different protocol (i.e. Ethernet) with a 100m distance. The long and short of it... Specify Sescom DMX1BK and be sure your have the right cable each and every time to get the job done.

Features:

• True DMX512 Construction
• Flexible & Easy to Use in the Field
• Rugged Black Matte PVC Jacket
• Corrosion Resistant Tinned Copper Braid
• Color-Coded Conductors for Easy Identification
• Meets or Exceeds DMX Standards
• RoHS Compliant
• Applicable Specifications: ANSI E1.11-2008 / USITT DMX512-A
• Available by the Foot

Specifications:

• 24AWG Stranded Bare Copper
• 4 Conductors
• Duofoilr Tape, Tinned Copper Braid
• Nom. Impedance: 120O
• Nom. Mutual Capacitance: 12.5 PF/Ft
• Nom. Velocity of Propagation: 78%
• Max. Operating Voltage: 300VRMS (non-UL)
• Insulation: Foam Polyethylene