Combining baseband video and audio processing, compression and IP networking features in a single, space-saving modular platform, the Selenio MCP3 now offers best-in-class uncompressed-over-IP functionality.
This multichannel uncompressed-over-IP module provides uncompressed signal transmission at high bitrates and quality for superior editable video, and is especially well-suited to low-latency broadcast contribution applications such as sports, live events and studio-to-studio production. Supporting real-time transport of *3G/HD/SD and IP, this card enables high-density, multichannel uncompressed over IP in a single-slot solution that provides up to 112 UCIP channels in the Selenio MCP3 platform.
The Selenio UCIP module is a multichannel encapsulate/de-capsulate over IP solution, offering real-time, high-quality transport of uncompressed-over IP-signals. It is available in multiple channel combinations for *3G/HD/SD-SDI signal support, as well as up to 8x independent unidirectional SDI channels in multiple combinations for Transmit (SDI → IP) or Receive (IP → SDI) modes, on a single module.
An ideal solution for video contribution applications over IP networks, the module harnesses the power of the Selenio media convergence platform, which offers higher density, enhanced redundancy schemes, an easy-to-use interface and low total cost of ownership. The platform’s flexible, expandable design enables customers to mix and match UCIP, JPEG-2000 and H.264/MPEG-2 functionality, as well as other Selenio processing capabilities, in the same frame for a future-proof solution.
* 3G-SDI is supported in Rel. 2.0
Specifications and designs are subject to change without notice.
HD/SD-SDI Input | |
---|---|
Number of Inputs | Up to 6 (bi-directional port shared with output) |
Standard | HD: SMPTE 292M (1.485, 1.485/1.001 Gb/s) SD: SMPTE 259M-C (270 Mb/s, 525/625 component video) 3G (AES67 mode only): SMPTE 424M (1080p50/59/60) |
Connector | (High-Density) HD-BNC |
Impedance | 75 ohms |
Signal Level | 800 mV ± 10% |
Return Loss | HD: >15 dB, typical, from 5 MHz to 1485 MHz SD: >15 dB, typical, from 5 MHz to 270 MHz 3G (AES67 mode only): >18 dB, typical, to 1.5 GHz and > 10dB to 3 GHz |
Equalization | HD: Adaptive cable equalization for >492ft (150 m) typical, of Belden 1694A coaxial cable SD: Adaptive cable equalization for >820 ft (250 m) typical, of Belden 1694A coaxial cable 3G (AES67 mode only): Adaptive cable equalization for >328ft (100m) typical, of Belden 1694A coaxial cable |
Note: All the unused output ports should be have 75Ω terminators. |
HD/SD-SDI Output Video | |
---|---|
Number of Outputs | Up to4 (bi-directional port shared with input) |
Standard | HD: SMPTE 292M (1.485, 1.485/1.001 Gb/s) SD: SMPTE 259M-C (270 Mb/s, 525/625 component video) 3G (AES67 mode only): SMPTE 424M (1080p50/59/60) |
Connector | (High-Density) HD-BNC |
Impedance | 75 ohms |
Return Loss | HD: >15 dB, typical, from 5 MHz to 1485 MHz SD: >15 dB, typical, from 5 MHz to 270 MHz 3G (AES67 mode only): >18 dB, typical, to 1.5 GHz and > 10dB to 3 GHz |
Signal Level | 800 mV ± 10% |
DC Offset | 0.0V ± 0.5 V |
Rise and Fall Time | HD: <270 ps (20% to 80%) SD: 400 - 1500 ps (20% to 80%) 3G (AES67 mode only): <135 ps (20% to 80%) |
Overshoot | <10% of amplitude (all outputs terminated) |
Jitter | Timing jitter: HD: <1 UI pk-pk SD: <0.2 UI pk-pk 3G (AES67 mode only): <2 UI pk-pk Alignment jitter: HD: <0.2 UI pk-pk SD: <0.2 UI pk-pk 3G (AES67 mode only): <0.3 UI pk-pk |
OP+SFP+TRSM+10G Single Mode Optical Transceiver | |||||
---|---|---|---|---|---|
Transmitter | |||||
Parameter | Minimum | Typical | Maximum | Unit | Notes |
Laser OMA Output Power | -5.2 | dBm | 1 | ||
Laser Mean Output Power | -8.2 | +0.5 | dBm | 1 | |
Laser Off Power | -30 | dBm | 1 | ||
Extinction Ratio | 3.5 | dB | 1 | ||
Transmitter and Dispersion Penalty (TDP) | 3.2 | dB | 1 | ||
Center Wavelength | 1260 | 1355 | nm | 1 | |
Optical Return Loss Tolerance | 12 | dB | 1 |
Receiver | |||||
---|---|---|---|---|---|
Parameter | Minimum | Typical | Maximum | Unit | Notes |
Receiver Sensitivity (OMA) | -12.6 | dBm | 1 | ||
Stressed Receiver Sensitivity (OMA) | -10.3 | dBm | 1,2 | ||
Receiver Power Overload | +0.5 | dBm | 1 | ||
Receiver Reflectance | -12 | dB | 1 | ||
Center Wavelength | 1260 | 1355 | nm | 1 | |
Vertical Eye Closure Penalty | 2.2 | dB | 3 | ||
Stressed Eye Jitter | 0.3 | UIp-p | 3 | ||
RX_LOS (OMA) Assert | -17 | dBm | 4 | ||
RX_LOS (OMA) De-Assert | -30 | dBm | 4 | ||
RX_LOS (OMA) Hysteresis | 0.5 | dB | 4 | ||
1. IEEE 802.3ae Clause 52 compliant |
OP+SFP+TRMM+10G Multi Mode Optical Transceiver | |||||
---|---|---|---|---|---|
Transmitter | |||||
Parameter | Minimum | Typical | Maximum | Unit | Notes |
Laser OMA Output Power | -4.3 | dBm | 1 | ||
Laser Mean Output Power | -1.0 | dBm | 1 | ||
Laser Off Power | -30 | dBm | 1 | ||
Extinction Ratio | 3.0 | dB | 1 | ||
Transmitter and Dispersion Penalty (TDP) | 3.9 | dB | 1 | ||
Center Wavelength | 840 | 860 | nm | 1 | |
Optical Return Loss Tolerance | 12 | dB | 1 |
Receiver | |||||
---|---|---|---|---|---|
Parameter | Minimum | Typical | Maximum | Unit | Notes |
Receiver Sensitivity (OMA) | -11.1 | dBm | 1 | ||
Stressed Receiver Sensitivity (OMA) | -7.5 | dBm | 1,2 | ||
Receiver Power Overload | -1.0 | dBm | 1 | ||
Receiver Reflectance | -12 | dB | 1 | ||
Center Wavelength | 840 | 860 | nm | 1 | |
Vertical Eye Closure Penalty | 3.5 | dB | 3 | ||
Stressed Eye Jitter | 0.3 | UIp-p | 3 | ||
RX_LOS (OMA) Assert | -12 | dBm | 4 | ||
RX_LOS (OMA) De-Assert | -30 | dBm | 4 | ||
RX_LOS (OMA) Hysteresis | 0.5 | dB | 4 | ||
1. IEEE 802.3ae Clause 52 compliant |
Power Consumption | |
---|---|
Module Power Consumption | 40 W maximum |
Manufacturer | Imagine Communications |
---|