The SB-5669K is pro 16x16 matrix routing switch. Supporting (16) HDMI Inputs & (16) HDMI outputs. The SB-5669K is based on the HDMI standard & supports full resolution HDMI video w/ embedded HDCP, RS-232 & bi-directional IR, all over a single HDMI cable. With a signal...
The SB-5669K is professional 16x16 matrix routing switch. Supporting (16) HDMI Inputs and (16) HDMI outputs. The SB-5669K is based on the HDMI standard and supports full resolution HDMI video with embedded HDCP, RS-232 and bi-directional IR, all over a single HDMI cable. With a signal bandwidth of 340Mhz, there is no signal degradation. High definition digital signals can be selected and distributed to any of the (16) Inputs to the (16) Outputs. The SB-5669K is certified as being fully CEC and HDCP 1.3 compliant with HDMI 1.4a, HDMI 4K2K@30Hz, DVI 1.0 and 3D formats and a wide frequency range of 25MHz~340MHz. Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD display. EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). A RS-232 Windows GUI interface is provided for matrix routing control (Windows only). The SB-5669Ks front panel includes a large LCD display which shows the current routing cross points of all Inputs to Outputs and it allows for easy setup of EDID modes. Functional manual control is achieved through push buttons located on the front panel. External functional control is achieved through RS-232 Serial connection, IR Remote Control or IP. The RS-232/IP connection allows functions to be controlled by systems like Control4 (drivers included) or any computerized software/hardware control system. The IP (Ethernet) port supports commands from a device when using either our provided PC GUI software or thru 3rd party emulator to an IP address set in the SB-5669K. The IP port does not have a built in web-sever. When using the SB-5669K Matrix Routing Switch, one-to-many or many-to-one connections can be established. You can easily connect any input device to any output device. You can also establish a single input device to many output devices, eliminating the need to constantly re-route video input and output cables.
Features:
Enables switching of (16) HDMI digital source devices to (16) HDMI devices
Supports HDMI 4K2K@30Hz and 1.4a 3D formats
HDMI digital video w/ embedded audio, DVI format and is CEC/HDCP 1.3 compliant
(7) function buttons for control and (7) worldwide EDID modes for full HDMI 4K2K@30Hz HD Video resolutions
Link speeds of up to 6.75Gbps (link clock rate of 340MHz)
Wide frequency range 25MHz ~ 340MHz
Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV HDMI resolutions 480i/480p, 576i/576p, 720p, 1080i/p & 4K2K@30Hz
Compatible with all HDMI source devices, PC monitors, plasma HD displays, HDTVs and audio receiver/amplifiers
Digital video TMDS formats for resolutions up to 1080p-60 with deep color 36-bit
Digital Audio Supports: Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2
Various user interface controls:
Windows-based GUI control via RS-232 interface control drive for 2000/XP/WIN7-32/WIN7-64/WIN8
Front panel push buttons
IR wireless remote control
Third party RS-232 controll (via simple ASCII)
ETHERNET series interface (via pc protocol commands)
Supports (7) world wide control function keys:
Full function front panel controls: ALL / OFF / EDID / LOCK / RECALL / MEMORY / ENTER