Telecast CHG3-CAM-3400-MX2-AB-AB Camera unit w/MX, opticalCON or...

Cutting-edge 3D & dual link production require multiple 3 Gbps video links between a camera location & its engineering station. Connecting w/ heavy, fragile copper cables can be distance-limiting & unreliable. The CopperHead 3400 puts all of the signals needed...
Manufacturer: Telecast Fiber Systems
$8,035.95
Availability: In stock
SKU
CHG3-CAM-3400-MX2-AB-AB
Manufacturer: Telecast Fiber Systems

Telecast CHG3-CAM-3400-MX2-AB-AB Camera unit w/MX, opticalCON or SMPTE 304M fiber connector - CHG3-CAM-3400-MX2-AB-AB



Cutting-edge 3D and dual link production require multiple 3 Gbps video links between a camera location and its engineering station. Connecting with heavy, fragile copper cables can be distance-limiting and unreliable.

The CopperHead 3400 puts all of the signals needed for 3D or dual link production onto a single, robust lightweight fiber cable, eliminating the problems of copper on any studio or remote production.

3D RIGS

The CopperHead 3400 mounts to any two-camera 3D beam splitter or side-by-side rig, creating an easy, flexible link from your camera to a truck, control room or flypack.

The compact camera unit accepts a 1.5 or 3 Gbps HD-SDI signal from each camera, as well as providing an additional 1.5 Gbps HD-SDI path each way for monitoring and 3D return. Bi-directional data paths include two RS-422/485/232 paths for camera control, a separate RS-232 for 3D rig control. A 10/100 Ethernet path, genlock, intercom and bi-directional audio paths are also provided.

The entire system runs on tactical fiber cable or on a SMPTE hybrid fiber cable if local power is not available at the camera rig.

DUAL LINK E-CINEMA

The CopperHead 3400 is the easy way to extend the distance between the dual link camera on-set and Video Village.

Dual link HD-SDI, return HD-SDI and camera control are just some of the paths provided by the CopperHead 3400 for your high-end TV, movie or commercial production.

Since the CopperHead 3400 transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations.

CopperHead 3400 is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling. You will save time and effort, and insure that your production gets done fast, right, on time, and on budget.

Key features and benefits

  • All camera signals on one lightweight fiber cable
  • Long distance range (multiple kilometers)
  • Three uncompressed HD-SDI signals from camera to base:
  • Two 1.5 to 3 Gbps paths for dual link or 3D cameras
  • One 1.5 Gbps path for monitoring and/or menus
  • Four bi-directional data streams
  • Two RS-422 paths
  • One RS-232 path
  • One 10/100 Ethernet path
  • Genlock
  • Two-way audio and intercom
  • Anton/Bauer and V-Battery options
  • Wide temperature range
  • Low power consumption
  • Two fiber cable options
  • Tactical fiber: military specification, battery/local power
  • Hybrid fiber (SMPTE 311M):
  • PowerWafer - low voltage - 95 W to 240 m (787 ft)
  • PowerPlus - high voltage - 100/150 W to 2 km (1.2 miles)

CopperHead fiber optic camera transceiver

Specifications

  • Video, Digital (A-Link and B-Link)
  • Interface:SMPTE 424M, 292M, 259M
  • Data rate:3 Gbps, 1.5 Gbps, or 270 Mbps
  • Video, Digital (bi-directional)
  • Interface:SMPTE 259M, 292M
  • Data rate:270 Mbps or 1.5 Gbps
  • Video, Digital (all)
  • Input level:800 mV p-p
  • I/O impedance:75 ohm
  • Output impedance:75 ohm
  • Bit-error rate at -22 dBm:10-12
  • Jitter (pathological data):<0.2>
  • Rise/fall times:<270>
  • Video, Analog (bi-directional)
  • Interface:RS-170, NTSC, PAL
  • Frequency response:30 Hz - 4.2 MHz: ±0.25 dB
  • 8 MHz: -3 dB
  • Video signal to noise ratio:
  • ≥70 dB
  • Differential gain:<2>
  • Differential phase:<>
  • Ethernet
  • Data support:10BaseT/100BaseT
  • Connector:Twisted pair RJ45
  • Cable compatible:UTP 100 ohm Cat5
  • I/O impedance:10 kohm / 30 ohm
  • Audio, Camera to Base
  • Number of channels:2
  • Input level at camera unit, switchable:Line: 4 dB
  • MIC: -60 dB or -10 dB
  • Impedanc:>15 kohm
  • Maximum input level:24 dBu
  • Sampling:24 bits, 128x (oversampled), 48 kS/s
  • Frequency response:±0.1 dB, 20 Hz to 20 kHz
  • Output at base station:Line level
  • Audio, Base to Camera (Return/IFB)
  • Number of channels:4
  • Input level at base station:Line level
  • Output at camera unit:Line level
  • Intercom
  • Number or channels:2
  • Interface types (base):RTS, Clear-Com or 4-Wire
  • Frequency response:200-18 kHz, ±3 dB
  • Max distortion:
  • ≤0.5 %
  • Noise:<-60>
  • Max gain (RTS or Clear-Com):
  • ≥24 dB
  • Min gain (RTS or Clear-Com):
  • ≤-45 dB
  • Electro-Optical
  • Operating wavelength, standard:1310 nm
  • Nominal optical loss budget values:Tx laser output power(std): 0 dBm
  • Rx sensitivity, HD-SDI: -22 dBm
  • Fiber compatibility:Single-mode
  • Optical connector options - camera unit:
  • Local power: MX or opticalCON
  • Remote power:Short range power: SMPTE 304M or opticalCON
  • Long range power: SMPTE 304M
  • Optical connector options - base station:
  • Unpowered cable ( TAC Cable): OpticalCON
  • Remote power - carrying cable (hybrid fiber/wire): Standard Power: SMPTE 304M, OpticalCON
  • Distance Limit *
  • TAC Cable (local power at camera):Standard laser: 15 dB optical budget
  • SMPTE 311M hybrid fiber:Standard internal power supply w/PowerWafer: ~ 300 m (984 ft), 95 W at 12 VDC *
  • Long range, HDX w/PowerPlus, LP: ~2 km (6562 ft), 100 W cont. / 150 W peak *
  • Mechanical/Environmental
  • Dimensions (W x H x D):Camera unit: 2.5 x 2.2 x 6.5 in
  • Base station: 17.5 x 1.75 x 9 in
  • PowerWafer: 5 x 2.2 x 6.12 in
  • PowerPlus LP (100 W): 5 x 2.5 x 6 in
  • PowerPlus HP (150 W): 5 x 3.7 x 6 in
  • HDX: 13 x 8.5 x 3.5 in
  • Weight:Camera unit: 1.5 lb
  • Base station: 5.0 lb
  • PowerWafer: 1.5 lb
  • PowerPlus: LP: 2.3 lb, HP: 2.5 lb
  • HDX: 10.5 lb
  • Power consumption:Camera unit: 8 W at 10-18 VDC
  • Base station ( TAC Cable): 10 W at 10-18 VDC
  • Temperature range:-25 to 55 C(with internal fan enabled)
  • Humidity range:0 to 95 % RH, non-condensing
  • Max noise level:16 dBA (Fan ON)
  • * Contact Miranda or your authorized CopperHead dealer for more information.

Diagram

CHG3-CAM-3400-MX2-AB-AB
Manufacturer: Telecast Fiber Systems
More Information
ManufacturerTelecast Fiber Systems
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite