The CopperHead 3200 system is a robust fiber optic link between your camcorder & your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) & analog (NTSC or PAL) program video, as well as all two-way...
Telecast CHG3-BS-3200-95VD-304M-RTS Base station w/internal power supply, opticalCON or 304M - CHG3-BS-3200-95VD-304M-RTS
The CopperHead 3200 system is a robust fiber optic link between your camcorder and your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) and analog (NTSC or PAL) program video, as well as all two-way camera control, audio, video, data, tally/call and intercom signals between the camera and the base station.
Key features and benefits
All camera signals on lightweight fiber cable
Broadcast quality video and audio
Return HD Video
Two-channel intercom
Multikilometer distance capability
Battery mount options for Anton/Bauer or V-Mount
Wide temperature range
Low power consumption
Multiple fiber connector options
Two fiber cable options
Tactical fiber
Military specification, battlefield proven
Requires local power at camera
SMPTE hybrid fiber
Internal power supply delivers 95 W power to the camera up to 213 m (780 ft)
External PowerPlus delivers 100 W power to the camera up to 2 km (1.2 miles) 150 W opt.
Use the TelePort 3G system to multiplex up to eight CopperHead 3200 systems onto a single strand of fiber
Durable, high reliability design
CopperHead fiber optic camera transceiver
Specifications
Video, Digital (bi-directional)
Interface:SMPTE 259M, 292M
Data rate:270 Mbps or 1.5 Gbps
Input level:800 mV p-p
I/O impedance:75 ohm
Output impedance:75 ohm
Bit-error rate at -22 dBm:10-12
Jitter (pathological data):<0.2>0.2>
Rise/fall times:<270>270>
Video, Analog (bi-directional)
Interface:RS-170, NTSC, PAL
Frequency response:30 Hz - 4.2 MHz: ±0.25 dB
8 MHz: -3 dB
Video signal to noise ratio:
≥70 dB
Differential gain:<2>2>
Differential phase:<>
Ethernet
Data support:10BaseT/100BaseT
Connector:Twisted pair RJ45
Cable compatible:UTP 100 ohm Cat5
I/O impedance:10 kohm / 30 ohm
Audio
Number of channels:1 to 4
Type:Balanced, line level
Impedance:>15 kohm
Maximum input level:24 dBu
Quantization:24 bits, 128x (oversampled)
Sample rate:48 kS/s
Frequency response:±0.1 dB, 20 Hz to 20 kHz
Intercom
Number or channels:2
Interface types (base):RTS, Clear-Com or 4-Wire
Frequency response:200-18 kHz, ±3dB
Max distortion:
≤0.5 %
Noise:<-60>-60>
Max gain (RTS or Clear-Com):
≥24 dB
Min gain (RTS or Clear-Com):
≤-45 dB
Electro-Optical
Operating wavelengths:1310/1550 nm
Tx laser output power (std./opt):-6/0 dBm
Rx sensitivity, HD-SDI:-22 dBm
Fiber compatibility:Single-mode
Optical connector options - camera unit:
Local power: MX or opticalCON
Remote power:Short range power, SMPTE 304M or opticalCON
* The maximum cable length varies due to optical loss that can depend on cable quality, dirt/dust/contamination on connectors, and number of fiber interconnects. When using hybrid cable for power, the size of the hybrid cable, as well as the power draw of the camera, lens, and accessories are also factors.