The HCO-1822 is a 2x1 HD/SD/ASI change-over which supports 16 channels of embedded audio & metadata. Change-overs are performed electronically by the HCO-1822's internal router. The module can perform a video & audio "Clean & Silent Switch" between sources using the...
Miranda HCO-1822-3RU HD/SD/ASI change-over with clean switch and ALC - HCO-1822-3RU
The HCO-1822 is a 2x1 HD/SD/ASI change-over which supports 16 channels of embedded audio and metadata. Change-overs are performed electronically by the HCO-1822's internal router. The module can perform a video and audio "Clean & Silent Switch" between sources using the CS option. In the event of a power failure, the signal is protected by relays fitted on the rear module, maintaining the integrity of the selected signal at the output. Relays are fully controllable via GPI. Input selection can be performed automatically or manually.
Key Features
Two source inputs and two outputs: program and preview
Supports HD (1080i50/59.94, 720p50/59.94) and SD (525, 625)
Electronic switching with relay backup (on rear module) maintains selected input with power loss
Automatic mode using internal signal analysis with alarm parameters
Manual change-over by local frame controller, iControl, iControl Solo or GPI
Alarm reporting to iControl facility monitoring and control system
Preview output selectable to follow PGM OUT or any of video inputs
Compatible with iControl end-to-end A/V fingerprint analyzer for lip sync error detection and measurement
GPI I/O (IN 1, IN 2, AUTO, BYPASS)
Optional clean switch function (video and 16 channels of audio)
GPI outputs give status of selected source for tallies
Optional on-board automatic loudness control (ALC) by Grass Valley
Reference input with passive loop through
Two line timing window with CS option
Thumbnail and audio level meter streaming
Loudness compliant to EBU R128-2014, ATSC A/85:2013 (FCC CALM compliant) and ARIB TR-B32 (ITU-R BS.1770-3)
Specifications
VIDEO INPUTS (2)
Signal:
SMPTE-259M-C (270 Mb/s)
SMPTE-292M (1.485, 1.485/1.001 Gb/s)
DVB-ASI, EN50083-9
Supported formats:
SD: 480i59.94, 576i50
HD: SMPTE-274M: 1080i59.94, 1080i50
HD: SMPTE-296M: 720p59.94, 720p50
Cable length:
200m (656 ft.) Belden 8281 at 270 Mb/s
90m (295 ft.) Belden 1694A at 1.485 Gb/s
Return loss: >15 dB up to 1.5 GHz
VIDEO OUTPUT
SD mode
Signal (2): SMPTE-259-C (270 Mb/s)
Supported formats: SD: 480i59.94, 576i50
Return loss: >15 dB up to 270 MHz
HD mode
Signal (2): SMPTE 292M (1.485, 1.485/1.001Gbps)
Supported formats:
HD: SMPTE 274M: 1080i59.94, 1080i50
HD: SMPTE 296M: 720p59.94, 720p50
Return loss: >15 dB up to 1.0 GHz (PGM out)
>12 dB up to 1.5 GHz (PVW out)
Jitter: <0.2UI as per SMPTE-292M
REFERENCE INPUT
Signal (1): SMPTE 170M/SMPTE 318M/ ITU 624-4/BUT 470-6 or comp. sync
SMPTE 274M / SMPTE 296M tri-level sync
Return loss: >35 dB up to 5.75 MHz
GPI (8)
Connector: Weco, opto isolated
GPI in (4): Used to select input and card's mode of operation
GPI out(4): Used for tallies to gives status of selected input and card's mode of operation
VIDEO PROCESSING PERFORMANCE
Signal path: 10 bits
Latency: 0.4 ns without CS option
Maximum of 2 lines with CS option
AUDIO PROCESSING PERFORMANCE
Quantization: 20-24 bits
Sampling: 48 kHz, synchronous
Number of channels: 16, 4 groups
Audio latency: 1 to 2 ms depending on processing options