Drake MPM860AG Agile Processor Module

MPM860AG is a high quality agile channel processor designed to convert an input channel 3 or 4 to any CATV output channel from 2 to 135 or broadcast channel from 2-69. 1 to 12 processors or other accessories can be mounted in 2 RU
Manufacturer: Drake
$249.00
Availability: In stock
SKU
MPM860AG
Manufacturer: Drake

Drake MPM860AG Agile Processor Module

The MPM860AG is a high quality agile channel processor designed to convert an input channel 3 or 4 to any CATV output channel from 2 to 135 or broadcast channel from 2-69. 1 to 12 processors or other accessories can be mounted in 2 RU (rack spaces) (3.5"). The MPM860AG joins the legendary Drake Mini Rack Solution as a device capable of receiving a modulated channel 3 or 4 from a digital DTA set top box that does not have composite audio/video outputs. If the output channel is stereo then the MPM860AG will pass the converted channel as stereo. The MPM860AG may also be used with other devices having a channel 3 or 4 modulator as well and may serve as an inexpensive means to provide stereo programs if present in the channel 3 or 4 output. Like other Drake agile mini rack products a convenient push wheel switch is used to select the output channel.

  • Convenient push wheel switches for channel selection.
  • Standard CATV channels 2 - 135 or Broadcast channels 2 - 69 selectable from front panel.
  • IRC & HRC CATV channel formats selectable by internal jumper.
  • Channel 3 or 4 input can be double sideband or vestigial sideband.
  • SAW filtering for superior adjacent channel performance and removal of undesired sideband if present at input.
  • Stereo ready providing original stream is stereo and passes via channel 3 or 4
  • Agility allows for "hot standby" solutions in headends.
  • Agility allows for minimal service stock.
  • An Economical NTSC channel 3 or 4 channel processor
  • +45 dBmV output
  • Front panel control of RF output level.
  • Complies with FCC Rules Part 76.
  • Use up to 12 MPM860AG processors in a two-rack height space powered by a single PSM121 Power Supply.
  • Use up to 4 MPM860AG processors in a one-rack height space by using the RMM4 Rack and Power Supply.
  • Rack mount and high capacity PSM121 Power Supply sold separate

MPM860AG Specifications

Input

Input Level

-39dBm / +10 dBmV, + or - 3dB

Input Impedance

75 ohm, 18dB return loss

Input Frequency

Channel 3 (61.25 MHz Visual Carrier) or
Channel 4 (67.25 MHz Visual Carrier)
Selectable via rear panel switch.

Output

Frequency Range

54 to 864 MHz.
Standard CATV channels 2 to 135, Normal operation.
HRC, IRC Channels 1-135, Selected via internal jumper.
Broadcast Channels 2-69, Selected via internal jumper.

FCC Offsets

Automatic, +12.5 kHz or +25 kHz channel dependant.

Output level

+45 dBmV

Output Impedance

75 Ohm, 10 dB return loss.

Frequency Stability

+ or - 5kHz

Spurious

-60dB @ +45dBmV out.

Broadband Noise

-77 dBc @ greater than + or - 12 MHz offset at +45 dBmV output, 4MHz bandwidth.

In Channel C/N

57 dB, 4 MHz bandwidth.

In Channel Frequency Response

Within 2 dB

Output Level Note

The output level of the MPM860AG is intended to be set at or very near +45dBmV. The front panel gain control adjusts the input level into the conversion circuitry and not the final output attenuation. For best noise and spurious performance please adjust the output level to +45dBmV with the actual input source that will be used with the device. If more than 1 or 2 dB of variation is needed to properly equalize the system, appropriate attenuators should be placed on the output of the MPM860AG.

General

DC Power Input

+5 V + or - 5% at 400 mA
+12 V + or - 5% at 200 mA

Operating Temp.

0deg to +50deg C ambient

Size

1" W x 3.5" H x 7.5" D

Weight

12 oz.

Specifications, price, and availability are subject to change without notice or obligation

Manufacturer: Drake
More Information
ManufacturerDrake
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite