Miranda VDA-1002-3RU Analog video DA

Miranda VDA-1002-3RU Analog video DA - VDA-1002-3RU

Key Features

• Analog video differential input with passive loop-through

• 8x 75 ohm outputs

• Supports NTSC and PAL video standards

• 90 MHz analog video bandwidth

• Control of gain from the card edge

• Status LED and remote reporting

Specifications

INPUT

• Signal: Any 1 Vp-p nominal signal

• Return loss:
  
  
  
  • >35 dB up to 10 MHz on all VDA single and double rears panels
  
  
  • >31 dB up to 5 MHz, with VDA-1002-3NRP rear panel
  
  
  

• Coupling: DC

• Level: 0.3 to 1.5 Vp-p

• Impedance: 75Ω bridging

• Max. common mode signal: 28 Vp-p

• Common mode rejection: >65 dB to 10 kHz

OUTPUT

• Signal (3-8): 1 Vp-p nominal signal adjustable

• Return loss: >35 dB up to 5.75 MHz

• Impedance: 75Ω

• Phase match between outputs: <0.1° at 4.43 MHz

• Output isolation signal: >40 dB at 10 MHz

• Response variation:

PROCESSING PERFORMANCE

• Gain range: ±3 dB

• Freq. response:
  
  
  
  • ±0.05 dB up to 5 MHz
  
  
  • ±0.15 dB up to 10 MHz
  
  
  

• Differential gain: <0.15%

• Diff. phase:
  
  
  
  • <0.15° at 8 loads
  
  
  • <0.1° at 2 loads
  
  
  

• H/V tilt:
• SNR: >64 dB up to 5 MHz (rms noise/0.714V, unweighted)
• Chrominance/luminance delay error: <±1 ns
• Chrominance/luminance gain error: <±0.02 dB
• Hum:
• Latency: 15 ns

ELECTRICAL

• Power:
  
  
  
  • 1.5W (SRP and SRP/L rears)
  
  
  • 2W (DRP, 3SRP and 3NRP rears)
  
  
  

Diagram