Miranda KMV-39N1-NX1-OPT-OP2 Output 2 enabled license

Miranda KMV-39N1-NX1-OPT-OP2 Output two enabled license - KMV-39N1-NX1-OPT-OP2

Key Features

• 20 quad-splits, or ten 8-input multiviewers, per 3 RU frame


• Fully loaded frame with 20 cards weighs only 8.6 kg (19 lbs.)


• Less than 300W for fully loaded 3 RU frame with 10 cards and up to 20 outputs (24W per dual output card)


• Available cascading bridge connector for combining up to 3 cards, for a 24x2 multiviewer configuration

• Requires less than 1/2 frame of processing delay, eliminating audio to video lip sync issues

• Ideal for installation within studios, control rooms and trucks

• Outstanding multiviewer picture quality, based on award-winning Kaleido-X technology, with all essential display elements for production


• Choice of single multiviewer output per card with up to 8 pictures, or dual quad-split displays


• DXF-200 optical DVI extension uses multimode fiber with SC connector to simplify long runs of up to 1 km (3,280 ft.)


• Easy layout editing with XEdit


• Rapid remote control with Kaleido-RCP2 and RCP-200


• Dual HDMI and HD/SD outputs for easy connection to monitors, or for feeding a router with multiviewer mosaics

• Tight integration with NVISION and third-party routers allows expansion up to 1,152 inputs and 288 multiviewer outputs


• Multiple multiviewer outputs can be controlled from a single remote panel

• Kaleido-Modular multiviewer cards can be installed in a 3 RU frame with other Densité Series cards, such as signal processors and DAs, for maximum space and cost-effectiveness

• Hot swappable cards with IP address recovery


• 3 RU frame features dual hot swappable power supplies and fans plus redundant Ethernet

• Triple rate, future-proof performance


• Stereoscopic 3D support (dual link 1.5 Gb/s, SMPTE-292M)

Specifications

• Signal: SMPTE-259M-C (270 Mb/s), SMPTE 272M-1994


• Formats: 480i59.94 and 576i50


• Return loss: >15 dB up to 270 MHz


• Jitter: <0.2 UI


• Cable length: 250m (820 ft.) Belden 1694A


• Connector: BNC

• Signal: SMPTE 292M-C (1.485, 1.485/1.001 Gb/s)


• SMPTE 272M-1994


• Formats :720p59.94, 1080p23.98, 1080p23.98SF, 1080p24, 1080p24SF, 1080p25SF, 1080p 29.97, 1080i50, 1080i59.94


• Return loss:>15 dB up to 1.5 GHz


• Jitter:<0.2 UI


• Cable length: 100m (325 ft.) Belden 1694A

• Signal: SMPTE 424M-2006 (2.97, 2.97/1.001 Gb/s) Level A


• Formats :1920x1080p60, 1920x1080p59.94, 1920x1080p50


• Return loss:>10 dB from 1.5 GHz to 3 GHz


• Jitter (wideband):<0.3 UI


• Cable length: 85m (276 ft.) Belden 1694A

• Signal: SMPTE 292M-C (1.485, 1.485/1.001 Gb/s)


• Resolutions:Mode A: 1024x768, 1366x768, 1280x1024, 1680x1050, 1600x1200 at 60 Hz


• Mode B: 1280x720 and 1920x1080 at 50/60 Hz


• Cable length: 100m (325 ft.) Belden 1694A

• Signal :HDMI V1.3


• Format: 1280x1024 up to 1920x1200p configurable


• Refresh rate supported (50 Hz and 59.94 Hz)


• Cable length: 4.57m (15 ft.)


• Connector: HDMI


• Signal path: 8 bits output

• Signal: 3G/HD-SDI SMPTE 424M and 292M compliant


• Supports data rates of 1483.5, 1485, 2967, 2970 Mb/s


• Return loss:
  
  
  
  • >15 dB up to 1.5 GHz
  
  
  • >10 dB from 1.5 GHz to 3 GHz
  
  
  
  


• Jitter (wideband): HD: <0.2 UI


• 3 Gb/s: <0.3 UI

• Internal Universal reference from the Densité frame

• Contact closure: GND


• Protection: Up to 24V


• Connector: Terminal block interface PCB via DB-26

• Maximum voltage: 24V


• Maximum current at 1V: 20 mA (through 200Ω series resistor)


• Pulse minimum duration: 10 μs


• Connector: Terminal block interface PCB via DB-26

• Signal:10/100 BASE-T


• Connector: RJ45

• Signal: RS-422 (SMPTE 207M, EBU-3245)


• Connector: Terminal block interface PCB via DB-26

• Signal path: 8-bit YCbCr to 24-bit RGB


• Processing delay: ~1 field in genlock mode, 1-2 fields in non-genlock mode

• Quantization: 20-24 bits


• Sampling: 48 kHz


• THD+N: 80 dB


• SNR: 98 dB

• Power consumption: 24W max