Sony HXCP70H 3 2/3-in Exmor CMOS sensors, camera

Affordable, three 2/3-in Exmor CMOS sensors, full HD compact system camera with direct optical fiber cable connection.
Manufacturer: Sony Pro
$18,035.49
Availability: In stock
SKU
HXCP70H
Manufacturer: Sony Pro

Sony HXCP70H 3 2/3-in Exmor CMOS sensors, camera


Overview


Compact, lightweight POV camera with lower power consumption, plus optical fiber connections

The HXC-P70 is a point-of-view POV camera developed for a wide range of more affordable applications than the HDC-P1, thanks to a longer cable distance extension and a higher sensitivity, in addition to its compact size, light weight and lower power consumption.

The HXC-P70 allows direct connection to the HXCU-FB70 camera control unit by optical fiber cable, in addition to two HD/SD-SDI outputs. The hybrid type fiber cable can extend the distance from the CCU up to 500 m, while supplying the required power. If a single-mode fiber cable is connected, the distance can extend up to 10 km with a local power supply.

The HXC-P70 adopts the same three 2.2-million pixels 2/3-inch type CMOS sensors as used on Sony high end camera such as the HXC-D70 and delivers high sensitivity of F12 at 59.94Hz or F13 at 50Hz. In addition, the camera uses an electrical CC filter alongside a servo motorized optical ND filter. These help to reduce the power consumption and make for an affordable total system with the CCU, cables, and remote controller. The camera is ideal for a wide variety of applications, from production studio and event hall/stadium work, to wider applications such as surveillance, conference and house of worship installations.



Features


Superb three 2/3-inch-type CMOS sensors
Keeping the same compact and lightweight body as the HDC-P1, the HXC-P70 achieves a cost reduction while providing the high picture quality equivalent to the reputable HXC-D70 HD/SD system camera by using the same image sensor. It achieves high sensitivity of F12 (at 1080/59.94i) or F13 (at 1080/50i) while keeping low noise ratio.

Integrated ND filter / Electrical CC filter, and TLCS
The HXC-P70 is equipped with a Neutral Density (ND) optical servo filter unit and electrical Color Correction (CC) filter. The electrical CC filter can be controlled from the remote control panel, which allows you to assign with four different color temperatures. In addition to the filter functions, thanks to the TLCS (Total Level Control System) function, gain/iris/shutter is automatically controlled by the ambient brightness, making it very efficient for nature shooting or surveillance use from morning to night.

Expandable operability with HXCU-FB70
Connecting the HXC-P70 with the HXCU-FB70 optical fiber camera control unit (CCU) enables precise remote control in picture adjustment and color matching of cameras, while also monitoring the SDI output signal.

Long-distance transmission up to 10 km
The hybrid type optical fiber cable can extend the distance from the HXCU-FB70 camera control unit up to 500 m while supplying the required power. In the case of connection with a single-mode fiber cable (SMF), it can extend up to 10 km, if you are using a local power supply. Using the SMF already laid as infrastructure in many facilities enables you to install the camera system quickly and easily.

Beneficial digital extender by 2x or 4x
The digital extender function expands the size of the image by a factor of two or four times in the center of the image sensors captured image. This function works without a decrease in sensitivity, such as an F-number drop, which typically occurs when using conventional optical extender functions.


Specifications


General


Power Requirements CCU: DC48V, 1.7A (max.)
Ext.DC In: DC12V, 3.6A (max.)
Power Consumption 17W
Operating Temperature -10C to +45C
14F to +113F
Storage Temperature -20C to +60C
-4F to +140F
Dimensions (W x H x D) *[1] 86 x 130 x 210 mm
3 1/2 x 5 1/8 x 8 3/8 inches
Mass Approx. 1.5 kg
Approx. 3 lb 4 oz

Camera Section


Pickup Device 3-chip 2/3-inch type CMOS
Effective Picture Elements 1920 x 1080 (H x V)
Signal Format HD: 1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
Spectrum System F1.4 prism system
Lens Mount Sony 2/3-inch type bayonet mount
Built-in Filters CC: Electrical
ND: 1; CLEAR, 2; 1/4ND, 3; 1/16ND, 4; 1/64ND
Sensitivity (at 2000 lx, 3200K, 89.9% reflectance) F12 (59.94 Hz), F13 (50 Hz)
Signal-to-noise Ratio Typical 60dB *[2] (1080/59.94i)
Modulation Depth HD : 45% or higher at 27.5 MHz (1080i)
Horizontal Resolution 1,000 TV lines or higher
Shutter Speed 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i mode)
Shutter Speed (Slow Shutter (SLS)) 2, 3, 4, 5, 6, 7, 8, 16, 32, 64-frame accumulation (Only for HD1080 mode)

Input/Output


Mic Input -60dBu to -20dBu, Balance, via D-Sub 9pin, female (x1)
DC Input XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC Output DC 10.5 V to 17 V, 1.5 A (max.) via D-Sub 9pin
SDI Output BNC (x2) HD-SDI or SD-SDI selectable
CCU Optical Fiber (x1), for Single Mode Fiber Cable
Distance of Power Supply (with HXCU-FB70) 500m (max.)
by CCFN Sony Hybrid Type Fiber Cable with Portable Lens Installed
Distance of Fiber Cable (with HXCU-FB70) 10km (max.)
by Single Mode Fiber Cable with Local Power Supply
Remote 8pin (x1)
RJ-45 (x1), Ether 10BASE-T, 100BASE-TX
Lens 12-pin (x1)
USB USB 2.0 (x1)
EXT Input/Output D-Sub 9pin, female (x1)

Supplied Accessories


Supplied Accessories Tally Number Plate (1 set)
Operation Guide (1)
Operation Manual (CD-ROM 1)

Notes


Note *[1] The values for dimensions are approximate.
*[2] The value is in NS (Noise Suppressor) : ON mode.
Manufacturer: Sony Pro
More Information
ManufacturerSony Pro
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite