Multidyne HUT SMPTE System- CCU Side

HUT - CCU Side, Portable, Hybrid cable SMPTE-304M socket connector, 2 singlemode fibers (ST connectors). For Sony HDC series, Panasonic, Ikegami, and Hitachi cameras only
Manufacturer: Multidyne
$1,195.00
Availability: In stock
SKU
HUT-BS-U2-SPR-ST2XXA
Manufacturer: Multidyne

SMPTE cable elimination system for Ikegami, Hitachi, Panasonic Cameras. - HUT-BS-U2-SPR-ST2XXA

CCU side of the system. 

This system eliminates the “Camera Power Supply Open” error that other systems have been reported to have.  Compatible with Telecast HDX / SHED System.

The HUT system frees camera chains from the limitations of hybrid copper/ fiber cabling, permitting cameras to be separated from their CCUs by distances of over 10Km using inexpensive, conventional single mode fiber, which has many advantages over SMPTE hybrid cable:

  • Eliminate RF, EMI and grounding issues
  • Faster set and strike times saves time and money
  • Reduced weight makes for lighter OB trucks, B-units and cable shipments

CONNECT ANYWHERE EASILY The plug and play system allows camera chains to connect via a facility’s fiber infrastructure or on tactical fiber cable in the field, using industry-standard connectors such as STs, LCs, SCs, or OpticalCON. The HUT system works by “spoofing” (or “tricking”) the camera and CCU into seeing a physical copper connection between them when connected only by single mode fiber cable.

LOCAL OR REMOTE POWER After a long run of single mode fiber, HUT-enabled camera systems can be configured in one of two ways:

  • Power the camera with the HUT-CP over 1Km of hybrid cable. Power is sufficient for hand-held cameras or cameras installed in sleds with long lenses and other high-power accessories.
  • Power the camera locally with 12VDC

ROUTE AND MULTIPLEX CAMERAS Once the hybrid cable is removed, a camera chain can be easily routed through optical routers, such as the LightningSwitch or EOS-5000. Use MultiDynes FiberSaver systems to multiplex up to nine cameras onto just one strand of single mode fiber. PASSIVE OR ACTIVE OPTICS While typically passive to the camera chain optics, the HUT system is also available with active optics, which can be used to:

  • Multiplex a camera chain on to a single fiber strand
  • Boost the optical range
  • Remap” the camera & CCU optics to different wavelengths or extended distances of up to 80K. In addition to below example, signals can be configured to run in either directing on the fiber.

Features:

  • SNMP Standard
  • Operate cameras on plain single mode fiber
  • Take advantage of installed fiber backbones w Extend distance without sacrificing performance
  • Plug & Play operation
  • Carry less hybrid cable
  • Choice of optical connectors
  • Choice of hybrid connectors
  • Can provide power for cameras up to 1km
  • Supports camera chains from Ikegami, Hitachi and Panasonic
  • Optional optical repeating/ remapping
  • Rugged Design
  • Designed and manufactured in New York
  • Remote camera shut-off optional
Manufacturer: Multidyne
More Information
ManufacturerMultidyne
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Search engine powered by ElasticSuite