Overview

The Avenview HDM-SWITCHPRO-VW4 is a unique powerful processor, developed especially for our installers’ and clients’ needs.

This small form factor HDMI device can perform many functions such as;

4x4 Matrix switcher - This device can input 4 HDMI digital sources and then distribute the video and audio signal to any 4 HDMI HD Monitors. It supports video timings up to 1080p@60Hz Full HD and WUXGA Wide 1920x1200 audio formats up to 7.1CH LPCM AT 192Hz. This device can be configured using the IR remote, Telnet, Rs232 or front panel buttons set to the desired 1-4 output sources.

Multi Input Splitter – This device can input 4 HDMI digital sources and then duplicate one source at once to the connected 4 HDMI HD Monitors. This device can be configured using the IR remote, Telnet, Rs232 or front panel buttons to set the desired output source.

Dual-Viewer – This device can input 4 HDMI digital sources and then combine, (4) four video signals onto two HD Monitors at Full HD 1080p. This device can be configured using the IR remote, Telnet, Rs232 or front panel buttons to set the desired PAP (Picture Aside Picture).

Video Wall 2x2 – This device can input 4 HDMI digital sources and scale (1) one input across the (4) four HD monitors in a 2x2 configuration at Full HD 1080p. This device can be configured using the IR remote, Telnet, Rs232 or front panel buttons to set the desired video across the (4) four HD Monitors with Bezel Correction to align the image seamlessly.

Features

• Input resolution settings from PC -VGA, XGA (1024 x 768), SXGA (1280 x 1024), UXGA (1600 x 1200), WUXGA (1920 x 1200);
• Input from Digital Player- 480p up to Full HD 1080p (1920 x 1080);
• Output Resolutions from 480p to 1080p Deep Color 8/10/12 bit source;
• Audio Supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/Dolby TruHD";
• DTS-HD;
• Fine tuning and adjustments of contrast, brightness, saturation and hue;
• Preset up to 4 favorite layout options;
• Auto EDID detection from the source;
• Bezel Correction support for 2x2 Video Wall Mode;
• USB for Service Mode and Firmware upgrade;
• Connection by IR Remote, Telnet or Rs232 for user setup and configuration;
• HDMI, HDCP and DVI Compliant;
• Factory Reset;
• Software control through USB, RS-232 and Ethernet;
• Firmware upgradable for support of new features and technology enhancements;
• 1U size;

Technical Specifications