Shape Sony FS5, FS5M2 bundle rig - FS5BR

Shape Sony FS5, FS5M2 bundle rig - FS5BR

FS5, FS5M2 0008 Vlock quick release with metabones support (FS5BP)

The SHAPE  V-Lock Quick Release Baseplate is a long format baseplate and it can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for ARRI standard handles. It has 1/4″-20 and 3/8″-16 tripod mount threads and a V-lock delta adapter for attaching SHAPE VCT Tripod Plate (VCTSH) or any VCT-14 tripod plate.
The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. (2 pairs) of  15 mm rods (8″ and 4″) are included for the front adn back of the baseplate. For attaching a matte box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15 mm Studio and 19 mm Studio adapters in place of the included one. The baseplate features three camera mount slots, all supporting 1/4″-20 and 3/8″-16 screws. The off-center slots allow you to mount your camera offset if you use a 15 mm Studio Adapter. 1/4″-20 and 3/8″-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4″-20 and two 3/8″-16 camera mount screws are included.


Spare pad for BP series (BP0050)

The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the BP SERIES v-lock quick release baseplate (BP0008, BP8000, BP7000). The pad utilizes a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder.


Sony FS5, FS5M2 adapter plate (FS5AP)

SHAPE designed the FS5/FS5M2 adapter plate to allow more adjustment when using the Sony FS5 or FS5M2 camera with the SHAPE V-lock quick release baseplate (BP0008). The adapter also comes with a removable Metabones adaptor  plate (FS5MA) in the front with 3 mm of vertical adjustment to provide great support. Fixed with 2 screws, this will support the weight and reduce the stress of the camera lens mount. For a precise positioning, we designed the bracket with a 3 mm vertical adjustment to make sure it’s well positioned for the best support.


15 mm 4" rods (15TUBE4)

This pair of SHAPE 15 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.


15 mm 8" rods (15TUBE8)

Pair of 15 mm rods 8″ long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminum tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn’t perfectly aligned or is at a slight angle to the rod clamp.



Single telescopic handle Arri rosette left side (HAND3)

Left telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort.
SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

Features

• Balanced solution when using the FS5, FS5M2 directly on the shoulder
  
• Made of CNC Machined Aluminum
  
• Telescoping Arri Rosette Handle (left side)
  
• Baseplate designed to be shoulder or tripod mounted
  
• Compatible with 15 mm lightweight and (15  or 19) mm LWS brackets
  
• Let you adjust your rod height bloc to match your camera’s optical center
  
• Protective rubber pads to protect your camera
  
• Designed with 2 standard Arri rosettes for handles mount
  
• Designed with 3 camera mount slots
  
• 1/4″-20 and 3/8″-16 accessory mount threads
  
• Removable velcro shoulder pad
  
• (2 pairs) of 15 mm rods (8″ and 4″)
  
• Quick release adapter plate with METABONES® support

What's in the Box:

• (1) BASEPLATE WITH SHOULDER MOUNT AND ROD BLOC SYSTEM (BP0008)
• (1) REMOVABLE SHOULDER PAD (BP0050)
• (1) SONY FS5 METABONES ADAPTER
• (1 PAIR) 15MM RODS 8 INCHES
• (1 PAIR) 15MM RODS 4 INCHES
• (1) TELESCOPIC HANDLE WITH PUSH-BUTTON AND ARRI ROSETTE MOUNT (LEFT SIDE)