For-A HD/SD Video Stabilizer - IVS-710HS
For-A HD/SD Video Stabilizer - IVS-710HS
Digital video stabilizer to correct unwanted camera movement and many forms of vibration.
The IVS-710HS provides real-time correction focused on unwanted camera motion while maintaining camera pan and tilt movement. Supports HD/SD-SDI input and output. The IVS-710HS offers high-performance video processing in a compact, 1/2U body. Ideal for eliminating unwanted motion from weather cameras, hand held news cameras, or program production motion problems.
- HD-SDI and SD-SDI formats: 1080i, 720p, 525/60, and 625/50
- Provides real-time motion correction (2-frame delay)
- Auto detection of camera pan/tilt — only unwanted motion corrected
- Correction for both live and recorded video
- Powerful correction: up to 40% of source screen size, vertically or horizontally
- Sub-pixel precision
- Straightforward design — simply supply video signals, no special connection required
- Correction in active area only, preserves blanking data
- Blanking data transmission timing not affected by correction delay
- GUI control function via web browser (Option)
- RS-232C/RS-422/LAN interfaces enable remote control (Option)
Specifications
|
Video Formats |
1080/60i, 1080/59.94i, 1080/50i, 720/60p, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL) |
|
Signal Processing |
4:2:2 component |
|
Video Input |
HD-SDI: 1.485/1.001 Gbps, 1.485 Gbps or SD-SDI: 270 Mbps 75Ω BNC x2 |
|
Video Output |
HD-SDI: 1.485/1.001 Gbps, 1.485 Gbps or SD-SDI: 270 Mbps 75Ω BNC x3 (processing bypass available for output 1) |
|
Quantization |
10-bit |
|
Sampling Frequency |
|
|
HD-SDI |
Y: 74.25/1.001 MHz, 74.25 MHz C: 37.125/1.001 MHz, 37.125 MHz |
|
SD-SDI |
Y: 13.5 MHz C: 6.75 MHz |
|
Internal processing |
2 inputs (Select manually) 1-channel processing 3 outputs |
|
Input cable length |
HD 5C-FB (Belden 1694A): approx. 100 m |
|
Genlock input |
None (Input Lock only) |
|
Output image size |
1920 x 1080 pixels max. (1080/59.94i, 1080/60i, 1080/50i) |
|
I/O delay |
1080/60i, 1080/59.94i, 1080/50i, 525/60, 625/50: 2 frames (No FS function) |
|
Shake correction |
Correction Range: Up to 40 % horizontally and vertically of images |
|
Frequency Response: Horizontally and vertically. Detects shakes for 1 Hz to 59.94/2 Hz (1080/59.94i, 720/59.94p, 525/60), 1 Hz to 60/2 Hz (1080/60i, 720/60p), or 1 Hz to 50/2 Hz (1080/50i, 720/50p, 625/50) (nominal values) |
|
|
Shake Type: vertical, horizontal, and diagonal (two-dimensional) |
|
|
Correction accuracy: sub-pixel level |
|
|
Synchronization |
Input mode, External reference mode (External reference mode required an IVS-710IF option) |
|
ANC data |
Both HANC and VANC can be passed through |
|
Interface |
Genlock Input: BB: 0.429 Vp-p (NTSC)/0.45 Vp-p (PAL) / Tri-level sync: 0.6 Vp-p, Phase adjustable range: ±1/2 H |
|
LAN: 100Base-TX / 1000Base-T RJ-45 x1 |
|
|
RS-232C/422: 9-pin D-sub (male) x1 |
|
|
Temperature / Humidity |
0℃ to 40℃ / 30% to 90% (no condensation) |
|
Power / Consumption |
100 VAC to 240 VAC±10%, 50/60Hz / 42VA (40W) (at 100 VAC) (with IVS-710IF) |
|
Dimensions / Weight |
212 (W) x 44 (H) x 350 (D) mm (half 1U) / 3 kg (with IVS-710IF) |
|
Accessories |
Operation manual / AC cord with retaining clip |
|
Consumables |
Cooling fan: replace every 5 years (at room temperature) |
|
Options |
Rack mount brackets (for single unit mount into EIA 1 RU rack space) |
To guard against the effects of salt or corrosive gases, do not use in a corrosive environment (near salt water, etc.).
Use protective housing when using in a corrosive environment.
| Manufacturer | For-A |
|---|
