Lightweight, compact design, portable HD/SD-supporting character generator perfect for relay applications. Software offers a rich array of drawing functions, more than 260 transition functions, template control, general-purpose file interface and more.
Standard auto-preview function: this lets you instantly check the input texts image on an actual TV monitor. Now it is possible to produce programming while you check CGs color and character position among other factors that are hard to tell with a PC monitor.
Import various image files: allows import of general-use image files.
Reads text and CSV files: supports text input and flow by saving texts form to a template. Importing text data or CSV files from outside sources lets you create CGs following a template.
Transmission function:
Transmission operation with thumbnail or list display: thumbnail or list display lets you confirm on-air or next texts while transmitting them. This application is well suited for texts checking and instant selection.
Standard capture function: this lets you capture the picture from the input line. Captured pictures are registered as texts to a pool folder and can be easily added to programming by drag and drop.
Standard simple schedule function: this weekly scheduling function, which comes standard, lets you specify programming to be transmitted on a certain day of the week or a specific date. This gives you easy automatic transmission of programming according to an operating program.
Input/Output GUI
Employs a simple, intuitive user interface integrating the input screen with the output screen.
BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or Tri-level sync: 0.6 Vp-p, 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.)
Input Lock range
±1 frame with respect to genlock signal phase
I/O Delay
Maximum: 1 frame
Interfaces
REMOTE: 9-pin D-sub (female) x 1
RS232C: 9-pin D-sub (male) x 1
USB: USB 2.0 Series-A type connector x 4 (2 ports on the front panel and 2 ports on the rear panel)
LAN1: 100BASE-TX/1000BASE-T compatible, RJ-45 x 1
LAN2: Not supported
VGA: 15-pin mini D-sub (female) x 1
GPI/ALARM 15-pin D-sub (female) x 1 - ALARM: power and fan alarm (relay make contact output) - GPI: 4-input/2-output (Input: contact closure, Output: open collector)
Temperature / Humidity
0ºC to 40ºC / 20% to 80% (no condensation)
Power
100 V AC to 240 V AC ±10%, 50/60 Hz
Power Consumption
130 VA (128 W) at 100 V AC 132 VA (116 W) at 200 V AC
Dimensions / Weight
430 (W) x 44 (H) x 500 (D) mm, EIA 1 RU / 8 kg
Consumables (if used 24 hours a day at room temperature)
Cooling fans: Replace every 3 years Power unit: Replace every 5 years Battery: Replace every 5 years