For-A HD/SD Chroma Keyer - MBP-100CK

Video Formats

HD-SDI: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD-SDI: 525/60, 625/50

Video formats (Option)

1080/23.98p, 1080/24p, 1080/29.97p, 1080/30p, 1080/23.98PsF, 1080/24PsF, 1080/29.97PsF, 1080/30PsF

Video Input

HD-SDI: 1.5 Gbps 75Ω BNC x 3 or SD-SDI: 270 Mbps 75Ω BNC x 3

Genlock Input

BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or Tri-level sync: 0.6 Vp-p, 75Ω BNC x 1, loop-through
(Terminate with 75Ω terminator, if unused.)

Video Output

 OUTPUT(V1-V4)
HD-SDI: 1.5 Gbps 75Ω BNC x 4 or SD-SDI: 270 Mbps 75Ω BNC x 4
(V1 outputs the bypassed signal from INPUT CAMERA when the unit is powered off.)
 OUTPUT 2 (V1-V4) (Same signals as OUTPUT)
HD-SDI: 1.485/1.001 Gbps 75Ω BNC x 4 or SD-SDI: 270 Mbps 75Ω BNC x 4
(V1 does not output the bypassed signal.)

Input Lock

±1/2 H (Up to 1H offset referring to genlock phase)

I/O delay

CAMERA: 1 frame (When the phase of input is the same as genlock phase.)
CGV / CGK: 1 line (When the phase of input is the same as genlock phase.)

Signal Processing

4:4:4:4 component

Chroma Keyer

High quality chroma keyer with FOR-A's unique algorithm

DSK

Mixing: Normal-mix or Additive-mix selectable, 4 layers

Camera Delay

0 H - 7 frames
*Adjustable in 2-pixel steps (HD: approx. 27nsec, SD: approx.74 nsec) for H phase.

Interfaces

REMOTE: 9-pin D-sub (female) x 1
RS-232C: 9-pin D-sub (male) x 1
USB: USB2.0, Series-A type connector x 4 (2 ports on front and 2 ports on rear)
LAN1: 100BASE-TX (1000BASE-T is future support) RJ-45 x 1
LAN2: Not used.
VGA: 15-pin Mini D-sub (female) x 1
GPI/ALARM: 15-pin D-sub (female) x 1
- ALARM: power and fan alarms (relay output)
- GPI: 4-input/2-output (relay input, open collector output)

Temperature / Humidity

0°C to 40°C / 20% to 80% (no condensation)

Power

100 VAC to 240 VAC ±10%, 50/60 Hz

Consumption

110 VA (115 W) at 100 VAC, 
132 VA (118 W) at 200 VAC

Dimensions / Weight

430 (W) x 44 (H) x 500 (D) mm, EIA 1 RU / Approx. 9 kg

Consumables
(if used 24 hours a day at room temperature)

Cooling fans: Replace every 3 years at normal temperature.
Battery: Replace every 5 years at normal temperature.

Accessories

Operation manual, AC Cord (cable retaining clip included), rack mount brackets