Kramer Electronics FC-28 10-port Serial, IR, GPI/O and Relay, PoE Control Gateway

Kramer Electronics FC-28 10-port Serial, IR, GPI/O and Relay, PoE Control Gateway

The FC-28 is a PoE-powered control gateway, capable of plug and play deployment over customer Ethernet LAN for remote control of customer controlled devices via bidirectional RS-232, IR, GPI/O and relay control connections. Multiple control clients can be IP-connected to the FC-28 control gateway for concurrent control of two RS-232,four IR controllable devices, such as AV scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lighting.

• 2 RS-232 Bi-directional Control Ports Control a device via bi-directional serial control protocols.
• 4 IR Emitter Control Ports Control a device via IR control protocols.
• 2 GPI/O Control Ports Controls a device via general purpose I/O ports, program-configured as digital input, digital output or analog input interface for controlling sensors, door-locks, audio volume and light dim level, or lighting control devices.
• 2 Relay Control Ports Control a device via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
• Simultaneous IP Control Communication With up to 40 IP control clients.
• IR Sensor Port Learns commands from IR remotes.
• Mini USB Port For firmware upgrades and local technical services.
• 1 Ethernet Control Port Remote protocol-based control port.
• PoE Support Per IEEE 802.3af standard.
• Built-in Web Pages Remote browser-based control and support.
• Easy Installation Single Ethernet cable wires for communication and PoE powering, and plug & play IP auto-setup deployment for simple and cost-reducing installation.

• OUTPUTS: 4 IR & relays on 2-pin terminal blocks.
• PORTS: 2 RS-232 serial on 3-pin terminal blocks, 2 GPI/O on 2-pin terminal blocks, 1 Ethernet on an RJ-45 connector, 1 mini USB connector for local services, 1 built-in IR sensor (for learning).
• SUPPORTED SERIAL PORT BAUD RATES: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 15200bps.
• RS-232 COMMUNICATION: Transparent up to 115200bps.
• IR EMITTER CABLE RANGE: 80m (260ft).
• SUPPORTED IR INPUT FREQUENCIES: 20kHz to 60kHz.
• SUPPORTED IR OUTPUT FREQUENCIES: 20kHz to 1.2MHz.
• MAXIMUM DATA HANDLING OF DEVICE: Up to 150kbps summed on all ports.
• POWER CONSUMPTION: 5V DC, 230mA.
• OPERATING TEMPERATURE: 0 to +40C (32 to 104F).
• STORAGE TEMPERATURE: 40 to +70C (40 to 158F).
• HUMIDITY: 10% to 90%, RHL non-condensing.
• COOLING: Convection.
• ENCLOSURE TYPE: Aluminum.
• RACK MOUNT: With optional rack adapter.
• VIBRATION: ISTA 1A in carton (International Safe Transit Association).
• SAFETY REGULATORY COMPLIANCE: CE.
• ENVIRONMENTAL REGULATORY COMPLIANCE: Complies with appropriate requirements of RoHs and WEEE.
• INCLUDED ACCESSORIES: Power adapter, IR Cable C-A35M/IRE-10.
• 2 RS-232 Bi-directional Control Ports Control a device via bi-directional serial control protocols.
• 4 IR Emitter Control Ports Control a device via IR control protocols.
• 2 GPI/O Control Ports Controls a device via general purpose I/O ports, program-configured as digital input, digital output or analog input interface for controlling sensors, door-locks, audio volume and light dim level, or lighting control devices.
• 2 Relay Control Ports Control a device via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.
• Simultaneous IP Control Communication With up to 40 IP control clients.
• IR Sensor Port Learns commands from IR remotes.
• Mini USB Port For firmware upgrades and local technical services.
• Easy Installation Single Ethernet cable wires for communication and PoE powering, and plug & play IP auto-setup deployment for simple and cost-reducing installation.
• 1 Ethernet Control Port Remote protocol-based control port.
• Built-in Web Pages Remote browser-based control and support.
• PoE Support Per IEEE 802.3af standard.
• Product Dimensions:
  

• Remote IP control of RS-232 and IR controlled devices
  
  
• K-Touch multi-clients IP room control
• LAN-based expansion of K-Config control system