Kramer Electronics FC-18 4K HDR Display ON/OFF Controller

Kramer Electronics FC-18 4K HDR Display ON/OFF Controller

FC-18 is a display ON/OFF controller for 4K@60Hz (4:4:4) HDR HDMI signals. It accepts and outputs an HDMI signal after reclocking and equalizing. On detection of the onset of an input signal FC-18 sends an ON command to the display or projector and on detection of the loss of the input signal FC-18 sends an OFF command. FC-18 can also be used to control a display device manually via front panel buttons, Ethernet or contact closure switches.

• Save on Power Costs Shut down display devices automatically when not in use.
• Facilitate Meeting Setups Just plug in the AV source and the display screen or projector automatically turn on. No more searching for the power button.
• High-Performance HDMI Acceptor Supports 4K@60Hz (4:4:4) HDR10, HDCP 2.2/1.4 signals at 18G (6G per channel) data rate, CEC (bypass), Dolby Vision (bypass) as specified in HDMI 2.0.
• Variety of Automatic Control Formats Commands are sent to the display device via CEC, RS-232, or Ethernet.
• Variety of Manual Control Formats Manually turn the display device ON and OFF via front panel button and RS-232/CEC commands, Ethernet, contact closure switches.
• Data Tunneling Supports data tunneling between the RS-232 port and the Ethernet ports.
• HDCP Compliance HDCP 1.4 and 2.2.
• Kramer Equalization & reKlocking Technology Rebuilds the digital signal integrity to travel longer distances.
• Selectable EDID Options Default (internal), external (sink) or userdefined.
• Firmware Upgrading via USB port.
• Easy Installation Compact DigiTOOLS fan-less enclosure for surface mounting or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.

• Save on Power Costs Shut down display devices automatically when not in use.
• Facilitate Meeting Setups Just plug in the AV source and the display screen or projector automatically turn on. No more searching for the power button.
• High-Performance HDMI Acceptor Supports 4K@60Hz (4:4:4) HDR10, HDCP 2.2/1.4 signals at 18G (6G per channel) data rate, CEC (bypass), Dolby Vision (bypass) as specified in HDMI 2.0.
• Variety of Automatic Control Formats Commands are sent to the display device via CEC, RS-232, or Ethernet.
• Variety of Manual Control Formats Manually turn the display device ON and OFF via front panel button and RS-232/CEC commands, Ethernet, contact closure switches.
• Data Tunneling Supports data tunneling between the RS-232 port and the Ethernet ports.
• Easy Installation Compact DigiTOOLS fan-less enclosure for surface mounting or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.
• 1 HDMI: On a female HDMI connector
• 1 HDMI: On a female HDMI connector
• 1 Ethernet: On an RJ-45 connector
• 1 RS-232: On a 3-pin terminal block
• 1 USB: On a female USB type-A connector
• Content Protection: HDCP 1.4 / 2.2
• Max. Resolution: 4K@60Hz (4:4:4)
• Control: Manual ON and OFF buttons
• Indicators: Display ON/OFF status, RS-232 communication and power LEDs
• Source: 5V DC
• Consumption: 580mA
• Operating Temperature: 0 to +40C (32 to 104F)
• Storage Temperature: 40 to +70C (40 to 158F)
• Humidity: 10% to 90%, RHL non-condensing
• Included: Power adapter, bracket set
• HDMI Support CEC (bypass), Dolby Vision (bypass) as specified in HDMI 2.0.
• HDCP Compliance HDCP 1.4 and 2.2.
• Kramer Equalization & reKlocking Technology Rebuilds the digital signal integrity to travel longer distances.
• Selectable EDID Options Default (internal), external (sink) or userdefined.
• Firmware Upgrading via USB port.
• Product Dimensions:
  12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
  
• Shiping Dimensions:
  15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H
  
• Product Weight:
  0.3kg (0.6lbs) approx.
  
• Shipping Weight:
  0.8kg (1.8lbs) approx.