Thor CWDM Optical Transmitter & Receiver kit for 6 L-Band RF channels over single fiber for MDU - F-LB61-CWDM-TxRx

Thor CWDM Optical Transmitter & Receiver kit for 6 L-Band RF channels over single fiber for MDU - F-LB61-CWDM-TxRx

Thor Fiber’s all new 6 Channel L-Band Tx & Rx kit is a new alternative to standard single and four LNB Satellite Dish feeds. Dish brands like DirecTV and Dish Network generate RF feeds onto four polarities, now satellite providers are adding an additional 5th polarity on very type specific dishes. The F-LB61 is Thor’s response to the growing popularity of now being able to stow away a dish in a remote location + having the added benefits of expanding RF frequency range. The LB61 can transmit 6 independent LNB signals from 50-2400MHz for integrators to drive analog, digital, and satellite feeds. Using an internal optical multiplexer we are able to deliver each polarity of the dish feed onto separate colors of light in the fiber spectrum creating unparalleled reliability and flexibility. This open ended transmitter and receiver is able to carry any frequency in the CATV and Satellite range. This creates an opportunity for installing ATSC (8VSB) antennas, dish arrays, and CATV driven coax feeds from a distant area all the way to your head end. Incorporating this MUX of L-Band signals can help solve a multitude of location problems that hinder the availability and installation of satellite dishes onto properties that have very distinct needs.

Features:

• Up to 6 RF feeds from satellite 4 LNB's over 1 stramd Single mode fiber
• Wide frequency response 850-2400 MHz or 54 -2400Mhz (optional)
• Compatible with multiple providers such as DirecTV, Dish Network, Free-to-air
• Designed for use with Single Wire Multiswitch systems
• Up to 32 end points - Receivers from a single transmitter, using 1 x32 optical splitter
• Plug and Play
• Does not optically saturate
• RF Signal Input to the Transmitter = RF Signal Output from the receiver (100% transparent)
• Transmitter RF Input can power LNB- 13V or 18V
• Sends 22Khz control tone
• Additional ATSC RF from local antena transport possible bacuse it support 54-2700Mhz spectrum
• Sends 22Khz control tone
• LCD display and Front panel managment
• Transmitter displays RF Input Power for individual RF feeds and Optical Ouput power for each individual 4 CWDM lasers
• Receiver displays Optical input power from each of the 4 lasers, including RF ouput Power
• Internal Power AC power supply 110V-220V
• Redundant power supply

Specifications:

• RF Inputs 6x Type-F 75 Ohm
• Frequency Range 850-2400 MHz / 54-2400Mhz
• RF Input Power Level (-25) - (-14) dBmV
• Optical Wavelength 6x CWDM 20nm Spacing 1310-1610nm
• Optical Output Power
• 3.5 dBm (2mW) - standard
• 6.0 dBm (4mW) Optional
• 8.0 dBm (6mW) Optional
• 10. dBm (10mW) Optional
• Optical Output Ports 1 SC/APC
• Laser Type 6x Feedback Controlled DFB type CWDM
• RF Return Loss 12 dB
• RF Link Gain 25 dB
• Control Interface RS-232 Serial (Optional)
• SNMP Network (optional) Front Panel
• Power Supply 110 / 220 VAC Auto Switching
• Power Consumption >50 W
• Dimensions 482 x 268 x 44 mm
• Weight 3.5 kg
• Operating Temperature 0 - 65 C