Thor 1Ch HD-SDI Transmitter with loopout & Receiver with 2 outputs over Singlemode Fiber kit 20km ST/PC - F-1MSDI-L-2Tx/Rx

Thor 1Ch HD-SDI Transmitter with loopout & Receiver with 2 outputs over Singlemode Fiber kit 20km ST/PC - F-1MSDI-L-2Tx/Rx

Thor Compact SDI mini Fiber Optic Transport unit that has one input SDI BNC port that also utilizes an extra loop out SDI connector on the transmitter for monitoring and for additional screening. The receiver uses the same technology as the transmitter so you can acutally have 2 SDI outputs on the receiving end of the Fiber. This allows for easy access to redistribute a primary Fiber Cable that needs to be split to two SDI outputs. It allows you to transmit HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission. The transmitter features a re-clocked and equalized SDI loop through and the receiver features two re-clocked and equalized SDI outputs.

Features:

• Signal is equalized and re-clocked prior to fiber optic transmission
• Transmitter features a re-clocked SDI loop through
• Receiver features two re-clocked SDI outputs
• Designed for fiber optic interoperability with other SMPTE 297-2006 fiber opticcompliant devices up to 2.97 Gbps
• Immunity to pathological patterns over entire link budget and operating temperature range
• Compliant with SMPTE 259M-2006,292-2006, 424M-2006, 297-2006
• Supports transmission of SMPTE305M-2005, 310M-2004, 344M-2000,DVB-ASI
• Supports both Single Mode and Multimode ( 62.5u & 50u) fiber types
• Supports HD/SD-SDI inputs with orwithout embedded audio and data
• 15 dB Optical Link Budget @ 2.97 Gbps

Specifications:

• Serial Video BNC Input:
• Number of Inputs 1
• Data Rate Range 19.4 Mbps to 2.97 Gbps
• Supported Standards: SMPTE 259M, 292, 297-2006,
• 424M-2006, 305M, 310M, 344M,
• DVB-ASI
• Re-clocked Data Rates: 270 Mbps (SMPTE 259M, DVB-ASI-270),
• 1.485 Gbps (SMPTE 292),
• 2.97 Gbps (SMPTE 494M)
• Equalization: Automatic up to 100m of Belden1694A at 3.0 Gbps, 200m at1.485 Gbps and 350m at 270 Mbps
• Return Loss >10dB up to 2.97 Gbps
• Serial Video BNC Loop-Through Output:
• Number of Loop-Throughs 1
• Signal Level 800mV ± 10%
• DC Offset 0V ± 0.5V
• Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
• < 270 ps at 1.485 Gbps per SMPTE 292;
• 0.4 ns to 1.5 ns at 270 Mbps
• per SMPTE 259M
• Overshoot < 10% of amplitude
• Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at
• 1.485 Gbps; < 2.0 UI at 2.97 Gbps
• color bar signal
• Alignment Jitter < 0.2 UI at 270 Mbps; < 0.2 UI at1.485 Gbps; < 0.3 UI at 2.97 Gbpswith color bar signal
• Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
• Optical Output:
• SMPTE 297-2006
• Connector ST/PC (special order SC/PC or FC/PC)
• Wavelength 1310nm (nominal)
• Emmiter Type FP Laser
• Output Power (nominal)